2013 Graves Motorsports "LINK" Exhaust System - Page 7 - Yamaha R1 Forum: YZF-R1 Forums
Appearance & Mods Looks is important. Ask here for help on, flushmounts, undertails, bodywork, exhaust models etc

Reply
 
LinkBack Thread Tools Display Modes
post #121 of 202 (permalink) Old 11-23-2012, 02:54 PM
Crossplane Courage
 
Join Date: Jul 2012
Location: Toronto, Ontario, Canada
Posts: 5
Quote:
Originally Posted by bacchus40 View Post
Shane posted this already, currently just stickers but the fancy ones are coming... funny thing is, it'll be the 1st thing i remove.! unfortunately i ran into a little issue with my LV cf cans... though there was very little heat transfer from the cf itself, the metallic decals did in fact heat up like a mofo and the whole logo was transferred to my saddle bags.!! the decals, fully melted in Reno, NV. were an absolute pain to remove after the fact...

Thats why im asking. I want to know how easy it is to remove lol id rather get the stickers and just take them off. Not a fan of that logo at all.
david1587 is offline  
Sponsored Links
Advertisement
 
post #122 of 202 (permalink) Old 11-23-2012, 03:18 PM
kickin' at the darkness
 
bacchus40's Avatar
 
Join Date: Nov 2006
Location: British Columbia
Posts: 8,199
hahha.. yeh,.. for the most part the stickers are easy to remove if the exhaust is brand new... like a total noob i didnt think of the fact they were metal and of course heat would transfer and ruin them once the saddle bags were on... but i could have removed them easily enough when i first got it... just grab a corner n' peel off... gooGone on a rag and you're good to go.. shouldn't leave a trace..


2009 YZF-R1 xPlanker

DJ PCV, AT200 & POD300, Leo Vince EVOII SBK/ARROW SS HEADER, GRAVES STACKS & AIS, GYTR, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, ASV clutch perch, RK520, JT 15T/44T, Lithtech chain adjust, ANNITORI RL
CLEVER WOLF CF, RIZOMA grips, APEX risers, CRG Arrows, GYTR seat, SHOGUN sliders, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLINs FPK, CL SBK5/RX3, HEL SS lines, Accossato Radial 19x18,
bacchus40 is offline  
post #123 of 202 (permalink) Old 11-23-2012, 03:22 PM
Crossplane Courage
 
Join Date: Jul 2012
Location: Toronto, Ontario, Canada
Posts: 5
Quote:
Originally Posted by bacchus40 View Post
hahha.. yeh,.. for the most part the stickers are easy to remove if the exhaust is brand new... like a total noob i didnt think of the fact they were metal and of course heat would transfer and ruin them once the saddle bags were on... but i could have removed them easily enough when i first got it... just grab a corner n' peel off... gooGone on a rag and you're good to go.. shouldn't leave a trace..
Awesome thanks for the advice. I really appreciate the help. Sucks to hear about your saddle bags but you live and learn i guess. lol
david1587 is offline  
post #124 of 202 (permalink) Old 11-23-2012, 06:52 PM
kickin' at the darkness
 
bacchus40's Avatar
 
Join Date: Nov 2006
Location: British Columbia
Posts: 8,199
np.


2009 YZF-R1 xPlanker

DJ PCV, AT200 & POD300, Leo Vince EVOII SBK/ARROW SS HEADER, GRAVES STACKS & AIS, GYTR, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, ASV clutch perch, RK520, JT 15T/44T, Lithtech chain adjust, ANNITORI RL
CLEVER WOLF CF, RIZOMA grips, APEX risers, CRG Arrows, GYTR seat, SHOGUN sliders, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLINs FPK, CL SBK5/RX3, HEL SS lines, Accossato Radial 19x18,
bacchus40 is offline  
post #125 of 202 (permalink) Old 11-24-2012, 08:26 AM Thread Starter
tHE GODFATHER
 
SpidermanSS's Avatar
 
Join Date: Feb 2002
Location: Canton, Ga.
Posts: 30,846
Send a message via AIM to SpidermanSS
Quote:
Originally Posted by david1587 View Post
Awesome because it is a beautiful system and seriously making me consider it over the akrapovic i was going to put on. Are the graves logos stickers or metal labels?

They are high temp stickers... The foil badges are coming in two weeks. When they come if you want a set I'll mail you some for free.




www.gravesport.com / www.r1-forum.com / www.r6-forum.com/ YWeRide Facebook


TEAM: SO FAST SO CLEAN

Twitter: @SpidermanSS

Instagram: @SpidermanSS

KILO 3483 : fastblueR1 : K_FleXXX : GLENN "ELVIS" : Gawarrior : Vman1300 : Bandrews
SpidermanSS is offline  
post #126 of 202 (permalink) Old 11-24-2012, 08:31 AM Thread Starter
tHE GODFATHER
 
SpidermanSS's Avatar
 
Join Date: Feb 2002
Location: Canton, Ga.
Posts: 30,846
Send a message via AIM to SpidermanSS
btw... I took some sounds clips but there is some background noise.. I might try it with my phone next week..

I need to install the PC5 onto the bike.. There is a special map for the PC5 that is something special.. It's a HIGH resolution map that you won't find anywhere else




www.gravesport.com / www.r1-forum.com / www.r6-forum.com/ YWeRide Facebook


TEAM: SO FAST SO CLEAN

Twitter: @SpidermanSS

Instagram: @SpidermanSS

KILO 3483 : fastblueR1 : K_FleXXX : GLENN "ELVIS" : Gawarrior : Vman1300 : Bandrews
SpidermanSS is offline  
post #127 of 202 (permalink) Old 11-24-2012, 08:36 AM
I RACE U LOSE
 
quick kurt's Avatar
 
Join Date: Oct 2011
Location: Philly now Langhorne Pa.
Posts: 3,919
Send a message via Yahoo to quick kurt
Quote:
Originally Posted by SpidermanSS View Post
They are high temp stickers... The foil badges are coming in two weeks. When they come if you want a set I'll mail you some for free.
Could I get a set to update my full Ti/carbon system ?, it only has stickers.

'06 50th GYT-R CarbonSlipons,Akra Y Graves stacks,blockoffs,covers BMCair Bazzaz Zafm Zfi mapsw Vortex w/520ERV3 Shogun sliders Vortex rearsets Renthal med.comp Ballistic12cell Stompgrip CRG levers Galfer SBK fr&rr rotors ProboltTi'12 50th WGP#145. Graves full Ti carbon ex,stacks,blockoffs BMCair Yosh case,oilfill,yokenut,axleblocks Renthal w/520ERV3 CRG RC2's Watsen's Shogun framesliders Renthal med.comp Ballistic8cell ProboltTi Lucky 13th R1-013Squadron Member
quick kurt is offline  
post #128 of 202 (permalink) Old 11-24-2012, 10:13 AM
look for special phrase here
 
greenstreak9205's Avatar
 
Join Date: Jul 2009
Location: WI
Posts: 9,842
Quote:
Originally Posted by Para-327th View Post
I pulled the trigger too early (which isn't unusual for me) and didn't get the 10% off.
Maybe Shane will still validate the discount for being an early customer



Quote:
Originally Posted by Meister37 View Post
Quit shaking your head, you're creating a draft!

The Man, The Legend Uncle P

Phantom Squadron CO Check Out Phantom Squadron Here
greenstreak9205 is offline  
post #129 of 202 (permalink) Old 11-24-2012, 03:08 PM
Timekeeper
 
NoPro's Avatar
 
Join Date: Jul 2011
Location: a glass house
Posts: 335
The black Friday code works on this! So hard not to pull the trigger on this.
NoPro is offline  
post #130 of 202 (permalink) Old 11-24-2012, 05:42 PM
kickin' at the darkness
 
bacchus40's Avatar
 
Join Date: Nov 2006
Location: British Columbia
Posts: 8,199
must_not_reach_for_credit_card!

can't_resist!


2009 YZF-R1 xPlanker

DJ PCV, AT200 & POD300, Leo Vince EVOII SBK/ARROW SS HEADER, GRAVES STACKS & AIS, GYTR, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, ASV clutch perch, RK520, JT 15T/44T, Lithtech chain adjust, ANNITORI RL
CLEVER WOLF CF, RIZOMA grips, APEX risers, CRG Arrows, GYTR seat, SHOGUN sliders, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLINs FPK, CL SBK5/RX3, HEL SS lines, Accossato Radial 19x18,
bacchus40 is offline  
post #131 of 202 (permalink) Old 11-24-2012, 06:47 PM
Banned
 
Join Date: Mar 2010
Location: in the dirt
Posts: 12,634
Quote:
Originally Posted by bacchus40 View Post
must_not_reach_for_credit_card!

can't_resist!
Just do it man
ss55539 is offline  
post #132 of 202 (permalink) Old 11-24-2012, 10:10 PM
R1 ate me
 
Join Date: Feb 2007
Location: West Fargo, ND
Posts: 497
2 questions. How hard would it be to remove the stainless straps on the muffler and powdercoat them black? Does the "Link" header allow enough room to remove the oil filter without loosening or removing the whole exhaust system?

Troy
2009 R1, 1988 YSR50, 2003 XR50
treimche is offline  
post #133 of 202 (permalink) Old 11-25-2012, 08:25 AM
look for special phrase here
 
greenstreak9205's Avatar
 
Join Date: Jul 2009
Location: WI
Posts: 9,842
Quote:
Originally Posted by treimche View Post
2 questions. How hard would it be to remove the stainless straps on the muffler and powdercoat them black? Does the "Link" header allow enough room to remove the oil filter without loosening or removing the whole exhaust system?

Quote:
Originally Posted by Meister37 View Post
Quit shaking your head, you're creating a draft!

The Man, The Legend Uncle P

Phantom Squadron CO Check Out Phantom Squadron Here
greenstreak9205 is offline  
post #134 of 202 (permalink) Old 11-25-2012, 06:43 PM
Banned
 
Join Date: Apr 2012
Location: NEW YORK CITY
Posts: 551
Send a message via AIM to iMa Boss
is this system available now to consumers? if so how much for slip ons?
iMa Boss is offline  
post #135 of 202 (permalink) Old 11-25-2012, 07:04 PM
I RACE U LOSE
 
quick kurt's Avatar
 
Join Date: Oct 2011
Location: Philly now Langhorne Pa.
Posts: 3,919
Send a message via Yahoo to quick kurt
Quote:
Originally Posted by iMa Boss View Post
is this system available now to consumers? if so how much for slip ons?
Check link on post #18

'06 50th GYT-R CarbonSlipons,Akra Y Graves stacks,blockoffs,covers BMCair Bazzaz Zafm Zfi mapsw Vortex w/520ERV3 Shogun sliders Vortex rearsets Renthal med.comp Ballistic12cell Stompgrip CRG levers Galfer SBK fr&rr rotors ProboltTi'12 50th WGP#145. Graves full Ti carbon ex,stacks,blockoffs BMCair Yosh case,oilfill,yokenut,axleblocks Renthal w/520ERV3 CRG RC2's Watsen's Shogun framesliders Renthal med.comp Ballistic8cell ProboltTi Lucky 13th R1-013Squadron Member
quick kurt is offline  
post #136 of 202 (permalink) Old 11-25-2012, 07:05 PM
フランクはゲイです
 
Para-327th's Avatar
 
Join Date: May 2007
Location: Colorado Springs, CO
Posts: 4,050
Quote:
Originally Posted by iMa Boss View Post
is this system available now to consumers? if so how much for slip ons?
http://www.gravesport.com/LINK-Systems.html

Cross posted with you Kurt.
Para-327th is offline  
post #137 of 202 (permalink) Old 11-25-2012, 08:15 PM
kickin' at the darkness
 
bacchus40's Avatar
 
Join Date: Nov 2006
Location: British Columbia
Posts: 8,199
Talking

Quote:
Originally Posted by ss55539 View Post
Just do it man
NOH!


2009 YZF-R1 xPlanker

DJ PCV, AT200 & POD300, Leo Vince EVOII SBK/ARROW SS HEADER, GRAVES STACKS & AIS, GYTR, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, ASV clutch perch, RK520, JT 15T/44T, Lithtech chain adjust, ANNITORI RL
CLEVER WOLF CF, RIZOMA grips, APEX risers, CRG Arrows, GYTR seat, SHOGUN sliders, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLINs FPK, CL SBK5/RX3, HEL SS lines, Accossato Radial 19x18,
bacchus40 is offline  
post #138 of 202 (permalink) Old 11-27-2012, 11:46 AM
My R1 Owns Me
 
StOBeR's Avatar
 
Join Date: Jul 2009
Location: Covington, GA
Posts: 1,175
It's done, new link 3/4 system purchased. Can't wait. This mean I've got another 3/4 system to sell, along with a Graves titanium y-pipe.

2009 R1
OEM Solo Cowl
Graves LINK 3/4 Slipons
Flash-Tuned ECU
PC-V
Quick Shifter
ASV Shorty Levers
Low Profile Smoke Signals
Integrated Smoke Taillight
Hot Bodies Smoke Screen

2008 Track ZX-6R
Vortex Clip-Ons
Arata Rearsets
Woodcraft Case Covers
Ohlins 25mm "Kit" Forks
WP "Kit" Rear Shock
Goodridge Braided Lines
Versah RJL Racing Pads
Dunlop Q2's
Woodcraft Dual Temp Gen II Warmers
Full Titanium Arata Exhaust
Vortex V3 Rearsets
Vortex Gas Cap
Vortex Front & Rear Sprockets
BMC Race Filter
StOBeR is offline  
post #139 of 202 (permalink) Old 11-27-2012, 10:43 PM
kickin' at the darkness
 
bacchus40's Avatar
 
Join Date: Nov 2006
Location: British Columbia
Posts: 8,199
good man, pics!


2009 YZF-R1 xPlanker

DJ PCV, AT200 & POD300, Leo Vince EVOII SBK/ARROW SS HEADER, GRAVES STACKS & AIS, GYTR, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, ASV clutch perch, RK520, JT 15T/44T, Lithtech chain adjust, ANNITORI RL
CLEVER WOLF CF, RIZOMA grips, APEX risers, CRG Arrows, GYTR seat, SHOGUN sliders, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLINs FPK, CL SBK5/RX3, HEL SS lines, Accossato Radial 19x18,
bacchus40 is offline  
post #140 of 202 (permalink) Old 11-28-2012, 04:14 AM
I eat my R1
 
OptimoPrime's Avatar
 
Join Date: Aug 2009
Location: Columbus, Ohio
Posts: 1,100
so are these gonna be like the volocity stacks where there is no dyno numbers at all for next 4 years? was intrested to see what kind of gains the header give vs cost.

1983 yamaha xj550 (SOLD)
1995 kawasaki gpz1100 (engine fail)
2006 suzuki gsxr600 (sold)
1981 yamaha xs450 (sold)
2003 honda superhawk 996 (Sold)
2001 suzuki TL1000r (sold)
2009 yamaha r1 (33k engine overheats SOLD)
2013 bmw s1000rr
OptimoPrime is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R1 Forum: YZF-R1 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome