Yamaha R1 Forum: YZF-R1 Forums banner

Shorty exhaust R1 2000

8K views 9 replies 7 participants last post by  Benocehcap 
#1 ·
Hi guys. Does anyone know how to make a shorty exhaust with a baffle or where to buy one in Australia, or anywhere eles in the world lol
 
#7 · (Edited)
Here is a video on how to do it. I think you have to cut the baffling so it's a trade off. If you shorten your muffler - you will make it louder. No way around it.


https://www.youtube.com/watch?v=A2nrE6w3aeI&feature=related



The good news is the mufflers I have seen like this are loud but not something that would get you in trouble.


..
 
#8 ·
When I did mine (yoshi) I cut 10 inches off the end. I removed ALL the baffling that was needing to be replaced already and got fresh material. 1 inch thick by 11 by 14. I rolled the material around the baffle, cut the excess and slid it on. I didn't go with any steel whool like it originally had as it takes a bit of sound deadening away. This pipe is a tad bit louder at high rpm's but at idle she is low and nice.

Keep us updated, OP


Sent from Motorcycle.com App
 
#10 ·
I want this exhaust!!!
LINK:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top