I finally cracked into the 9s with my 11 - Yamaha R1 Forum: YZF-R1 Forums
Drag Racing 1/8 and 1/4 mile Performance.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 29 (permalink) Old 11-03-2012, 06:09 PM Thread Starter
My R1 eats me.
 
Join Date: Jul 2012
Location: QLD, Australia
Posts: 19
I finally cracked into the 9s with my 11

After trying for the last 3 months of trying to get into the 9.xxx run i finally done it
My bike is a 2011 R1 and current mods are -1 +2 520 conversion, GYTR slipons with a MJS mid pipe, PC5 with custom tune with ignition module and quick shifter and yesterday i went out with the front end strapped and finally got it.
not just once either but ran 5 runs in the 9.9x out of 13 runs

Normally once we run anything under a 10.000 we get kicked off until we get our ANDRA drag racing license but luckily enough i was aloud to keep running.

So now i can finally say ive cracked into the 9s.

Next step is to lower the rear end and hopefully go abit quicker.


Last edited by devil_man; 11-03-2012 at 06:26 PM.
devil_man is offline  
Sponsored Links
Advertisement
 
post #2 of 29 (permalink) Old 11-03-2012, 07:40 PM
I killed em Gilbert
 
DerrickWade's Avatar
 
Join Date: Aug 2005
Location: Illinois
Posts: 6,112
Congrats!


Courtesy of Petrol Spice
DerrickWade is offline  
post #3 of 29 (permalink) Old 11-04-2012, 08:04 AM
I RACE U LOSE
 
quick kurt's Avatar
 
Join Date: Oct 2011
Location: Philly now Langhorne Pa.
Posts: 3,960
Send a message via Yahoo to quick kurt
I know the feeling, great job bud ! Can't wait to take my '12 to the strip.

'06 50th GYT-R CarbonSlipons,Akra Y Graves stacks,blockoffs,covers BMCair Bazzaz Zafm Zfi mapsw Vortex w/520ERV3 Shogun sliders Vortex rearsets Renthal med.comp Ballistic12cell Stompgrip CRG levers Galfer SBK fr&rr rotors ProboltTi'12 50th WGP#145. Graves full Ti carbon ex,stacks,blockoffs BMCair Yosh case,oilfill,yokenut,axleblocks Renthal w/520ERV3 CRG RC2's Watsen's Shogun framesliders Renthal med.comp Ballistic8cell ProboltTi Lucky 13th R1-013Squadron Member
quick kurt is offline  
post #4 of 29 (permalink) Old 11-04-2012, 08:06 AM
A Biche & a Muddafvcka!
 
2 Raven Rider's Avatar
 
Join Date: Mar 2010
Location: west-consin
Posts: 1,831
Pretty good feeling huh! those are some good reaction times too man :

Sent from my SPH-D700 using Motorcycle.com Free App

PHANTOM#09

MODS:
Full Leo Vince exhaust.
Spencer Cycle track pack clutch
12K HID's.
Hot bodies Flush mounts.
Integrated Tail light.
Swing Arm Extensions.
Chain and Sprockets (-1+2).
520 conversion.
Shnitz Lowering Strap.
Roth Industries velocity stacks, block offs, and mirror block offs.
Auctmarts Fairings.
12 O'clock Speedo heeler.
PC5-map by motomummy!

STOCK: 10.2 @ 140
MODDED: 9.9 @ 140...no launch 2012
2 Raven Rider is offline  
post #5 of 29 (permalink) Old 11-04-2012, 08:31 AM
I eat my R1
 
DragMyR1's Avatar
 
Join Date: May 2012
Location: JACKSONVILLE, NC
Posts: 724
Quote:
Originally Posted by devil_man View Post
After trying for the last 3 months of trying to get into the 9.xxx run i finally done it
My bike is a 2011 R1 and current mods are -1 +2 520 conversion, GYTR slipons with a MJS mid pipe, PC5 with custom tune with ignition module and quick shifter and yesterday i went out with the front end strapped and finally got it.
not just once either but ran 5 runs in the 9.9x out of 13 runs

Normally once we run anything under a 10.000 we get kicked off until we get our ANDRA drag racing license but luckily enough i was aloud to keep running.

So now i can finally say ive cracked into the 9s.

Next step is to lower the rear end and hopefully go abit quicker.

nice eight also bro!

R1-016 'Venom' Squadron Member "NC"
08' R1/PC3/M4 CF EXHAUST/McCoys Clutch Saver Mod/MP Revolver Quick Throttle/CF TANK COWL/ 14 OVER EVIL SWING ARM/ PRO-TECH REAR SETS/PRO-BOLTS BITS/ZERO GRAVITY LATIGO SEAT/FLASH-TUNE ECUINTERFACE/HOT BODIES FLUSH MOUNTS/SCOTTS ROTARY DAMPER/SOUPYSPERFORMANCE ADJ. LINK/BMC RACE FILTER/BALLISTIC 12 CELL EVO 2 BATTERY/VORTEX CLIPS ON'S FUEL CAP SPROCKS/DDM DUAL HID's/Tsubaki 530 Sigma O-Ring Chain

LIVE FAST
DragMyR1 is offline  
post #6 of 29 (permalink) Old 11-04-2012, 12:22 PM
My R1 eats me.
 
Join Date: Nov 2012
Posts: 4
nice work made

2007 Yamaha R1 Raven Edition 9.969@142mph Stockwheelbase
2007 Yamaha YZF450 Supermoto
ingiR1 is offline  
post #7 of 29 (permalink) Old 11-04-2012, 03:50 PM Thread Starter
My R1 eats me.
 
Join Date: Jul 2012
Location: QLD, Australia
Posts: 19
Thanks guys. It was a great feeling to finally get under the 10s mark.

Some how that day I was getting some pretty good reaction times. They ranged from -.002 to .076.
So now I'm in the process of getting of racing license sorted and see how I go at compittion racing.
I'm also going to head back out on Wednesday night and try and improve my times a little bit more
devil_man is offline  
post #8 of 29 (permalink) Old 11-04-2012, 06:30 PM
I eat my R1
 
brocks07R1's Avatar
 
Join Date: Oct 2009
Location: Delaware
Posts: 175
Good

Quote:
Originally Posted by devil_man View Post
After trying for the last 3 months of trying to get into the 9.xxx run i finally done it
My bike is a 2011 R1 and current mods are -1 +2 520 conversion, GYTR slipons with a MJS mid pipe, PC5 with custom tune with ignition module and quick shifter and yesterday i went out with the front end strapped and finally got it.
not just once either but ran 5 runs in the 9.9x out of 13 runs

Normally once we run anything under a 10.000 we get kicked off until we get our ANDRA drag racing license but luckily enough i was aloud to keep running.

So now i can finally say ive cracked into the 9s.

Next step is to lower the rear end and hopefully go abit quicker.

Good job man. Stay on that seat and it will get much better man.

Heads done by docdug, ECU Flashing, Brocks full shortmeg undertail exhaust, Powercommander V, Factory pro Velocity stacks, No air filter, Brocks clutch mod, 3 Mccoys HD springs, Swingarm extention 63.5", -2 N stock gearing, Michelin Cup rear tire, Front end straps, Adjustable lowering link thats machined 2 more inches for extra low, Track pack clutches.VP MRX01
brocks07R1 is offline  
post #9 of 29 (permalink) Old 06-23-2013, 08:16 PM
Stealth R1
 
Jett-r1's Avatar
 
Join Date: Jun 2013
Location: Brisbane, Austrlia
Posts: 35
Good job it's also good to see another brissy boy on the forum might even see you out at willowbank
Jett-r1 is offline  
post #10 of 29 (permalink) Old 06-23-2013, 10:36 PM
I eat my R1
 
C3L1CA's Avatar
 
Join Date: Aug 2007
Location: Oakdale, MN
Posts: 264
Congrats on breaking into the 9s! It's an addicting

C3L1CA is offline  
post #11 of 29 (permalink) Old 07-15-2013, 11:11 PM
1/4 RACER
 
Boss1984's Avatar
 
Join Date: Oct 2012
Location: COLLINSVILLE IL
Posts: 582
Congrats man!! I'm also on the quest for 9's. can you please post a link to where you found the bracket to run the straps on.. Also where did you get the straps? Thanks!

2012 WORLD GP R1.. Flush mounts,smoked screen, smoked brake light, frame/spool/case sliders, K&N filter, full graves low mount exhaust, flash-tune, Driven 520 conversion 16/47, wheel stripes, 6k HID kit, euro air box mod, front black pegs, driven preload adjusters, brake res socks, Harris grips, USB port, PSR oil cap, Danosperformance quickshifter, 6.5" bolt-on extension, bremzen brake line, suspension set for drag strip, 1.5" front drop, 2" rear drop, Graves clutch mod
9.43@144
Boss1984 is offline  
post #12 of 29 (permalink) Old 07-17-2013, 03:23 PM
A Biche & a Muddafvcka!
 
2 Raven Rider's Avatar
 
Join Date: Mar 2010
Location: west-consin
Posts: 1,831
Quote:
Originally Posted by Boss1984 View Post
Congrats man!! I'm also on the quest for 9's. can you please post a link to where you found the bracket to run the straps on.. Also where did you get the straps? Thanks!
Looks like you'll need this

http://www.tobefast.com/schnitz-lowe...7-f-64085.html

And this

http://www.tobefast.com/schnitz-raci...4-f-64085.html

Sent from Motorcycle.com Free App

PHANTOM#09

MODS:
Full Leo Vince exhaust.
Spencer Cycle track pack clutch
12K HID's.
Hot bodies Flush mounts.
Integrated Tail light.
Swing Arm Extensions.
Chain and Sprockets (-1+2).
520 conversion.
Shnitz Lowering Strap.
Roth Industries velocity stacks, block offs, and mirror block offs.
Auctmarts Fairings.
12 O'clock Speedo heeler.
PC5-map by motomummy!

STOCK: 10.2 @ 140
MODDED: 9.9 @ 140...no launch 2012
2 Raven Rider is offline  
post #13 of 29 (permalink) Old 07-17-2013, 09:08 PM
1/4 RACER
 
Boss1984's Avatar
 
Join Date: Oct 2012
Location: COLLINSVILLE IL
Posts: 582
^^ placing my order tomorrow. Thanks!

2012 WORLD GP R1.. Flush mounts,smoked screen, smoked brake light, frame/spool/case sliders, K&N filter, full graves low mount exhaust, flash-tune, Driven 520 conversion 16/47, wheel stripes, 6k HID kit, euro air box mod, front black pegs, driven preload adjusters, brake res socks, Harris grips, USB port, PSR oil cap, Danosperformance quickshifter, 6.5" bolt-on extension, bremzen brake line, suspension set for drag strip, 1.5" front drop, 2" rear drop, Graves clutch mod
9.43@144
Boss1984 is offline  
post #14 of 29 (permalink) Old 07-18-2013, 08:45 AM
A Biche & a Muddafvcka!
 
2 Raven Rider's Avatar
 
Join Date: Mar 2010
Location: west-consin
Posts: 1,831
Glad I can help :

Sent from Motorcycle.com Free App

PHANTOM#09

MODS:
Full Leo Vince exhaust.
Spencer Cycle track pack clutch
12K HID's.
Hot bodies Flush mounts.
Integrated Tail light.
Swing Arm Extensions.
Chain and Sprockets (-1+2).
520 conversion.
Shnitz Lowering Strap.
Roth Industries velocity stacks, block offs, and mirror block offs.
Auctmarts Fairings.
12 O'clock Speedo heeler.
PC5-map by motomummy!

STOCK: 10.2 @ 140
MODDED: 9.9 @ 140...no launch 2012
2 Raven Rider is offline  
post #15 of 29 (permalink) Old 08-20-2013, 04:06 PM
Just made this great wheelie.. did you see it?!
 
Join Date: Aug 2008
Location: Smithfield, VA
Posts: 68
Congrats on the 9s! I am also on the hunt! Just a quick question, im having a hard time finding a bracket for the straps as well. The link posted above doesnt work anymore, just brings me to www.tobefast.com but not to a product. Can you point me in the correct direction or tell me how you strapped yours?

Thanks!
blitzblue1032 is offline  
post #16 of 29 (permalink) Old 08-20-2013, 04:53 PM
A Biche & a Muddafvcka!
 
2 Raven Rider's Avatar
 
Join Date: Mar 2010
Location: west-consin
Posts: 1,831
Quote:
Originally Posted by blitzblue1032 View Post
Congrats on the 9s! I am also on the hunt! Just a quick question, im having a hard time finding a bracket for the straps as well. The link posted above doesnt work anymore, just brings me to www.tobefast.com but not to a product. Can you point me in the correct direction or tell me how you strapped yours?

Thanks!
What year is you're bike?


Sent from Motorcycle.com Free App

PHANTOM#09

MODS:
Full Leo Vince exhaust.
Spencer Cycle track pack clutch
12K HID's.
Hot bodies Flush mounts.
Integrated Tail light.
Swing Arm Extensions.
Chain and Sprockets (-1+2).
520 conversion.
Shnitz Lowering Strap.
Roth Industries velocity stacks, block offs, and mirror block offs.
Auctmarts Fairings.
12 O'clock Speedo heeler.
PC5-map by motomummy!

STOCK: 10.2 @ 140
MODDED: 9.9 @ 140...no launch 2012
2 Raven Rider is offline  
post #17 of 29 (permalink) Old 08-20-2013, 04:54 PM
A Biche & a Muddafvcka!
 
2 Raven Rider's Avatar
 
Join Date: Mar 2010
Location: west-consin
Posts: 1,831
Nvm I just looked at you're profile....

Sent from Motorcycle.com Free App

PHANTOM#09

MODS:
Full Leo Vince exhaust.
Spencer Cycle track pack clutch
12K HID's.
Hot bodies Flush mounts.
Integrated Tail light.
Swing Arm Extensions.
Chain and Sprockets (-1+2).
520 conversion.
Shnitz Lowering Strap.
Roth Industries velocity stacks, block offs, and mirror block offs.
Auctmarts Fairings.
12 O'clock Speedo heeler.
PC5-map by motomummy!

STOCK: 10.2 @ 140
MODDED: 9.9 @ 140...no launch 2012

Last edited by 2 Raven Rider; 08-20-2013 at 05:02 PM.
2 Raven Rider is offline  
post #18 of 29 (permalink) Old 08-20-2013, 05:07 PM
A Biche & a Muddafvcka!
 
2 Raven Rider's Avatar
 
Join Date: Mar 2010
Location: west-consin
Posts: 1,831
It appears that the brackets are not on the website as of right now. If I remember right, they were a limited quantity...you might wanna keep checking tho

Sent from Motorcycle.com Free App

PHANTOM#09

MODS:
Full Leo Vince exhaust.
Spencer Cycle track pack clutch
12K HID's.
Hot bodies Flush mounts.
Integrated Tail light.
Swing Arm Extensions.
Chain and Sprockets (-1+2).
520 conversion.
Shnitz Lowering Strap.
Roth Industries velocity stacks, block offs, and mirror block offs.
Auctmarts Fairings.
12 O'clock Speedo heeler.
PC5-map by motomummy!

STOCK: 10.2 @ 140
MODDED: 9.9 @ 140...no launch 2012
2 Raven Rider is offline  
post #19 of 29 (permalink) Old 08-20-2013, 05:11 PM
Just made this great wheelie.. did you see it?!
 
Join Date: Aug 2008
Location: Smithfield, VA
Posts: 68
2011 . It just baffles me that noone offers a bracket for the 09-13, at least not that i can find. Ive been googleing for 2 days now and have come up with nothing lol. I know people are doing it, i just cant find out how lol.
blitzblue1032 is offline  
post #20 of 29 (permalink) Old 08-20-2013, 05:13 PM
Just made this great wheelie.. did you see it?!
 
Join Date: Aug 2008
Location: Smithfield, VA
Posts: 68
Gotcha, ill do that. I knew i had seen them somewhere before when i was shopping a couple months ago and then everything vanished lol. Even when i called mccoys they said they didnt have any and didnt know how people were doing it lol.
blitzblue1032 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R1 Forum: YZF-R1 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome