Do you need 98-01 R1 parts, I have them!!!

Tell me what you need, I probably have them, except for frame/engine/tranny I Compile a list of what i have left: Left passenger bracket with peg tail light 2 right heel guards with bracket 1 left heel guard with bracket tail section red has a crack and rash on right side repairable left lower fairing has a one the size of a dime left mirror If i have anything else i will update the list Pm if u are interested

Flux capacitor? :beer

right side clip on/handlebar. right side rear set/footpeg. both items for an '04 R1.

a blue 98-99 single seat cowl?

98-01 parts only

Originally posted by Droog Flux capacitor? :beer :finger :lol

Originally posted by blur1 a blue 98-99 single seat cowl? No I dont, I had a red one but it sold 2 wks ago

01 rd upper,headlight

04-05 stock Faring stay?

Need the left hand switch control with choke lever and a fork cap assembly,hav'nt had luck finding any Thanks

rear wheel

Rear wheel axle & nut that come with it.

mirrors?

Driver seat? PM me a price. WES

Do you have a Faring stay for a 2000-01 yamaha R1? if so I'm very interested please send pics also to mthom006@fiu.edu It is not allowed to come off a 98-99, it must only be for a 2000-01 yamaha R1

looking for an upper fairing 98' blue

front brake res. front brake rotors front/rear rims :)

R/R? Pm me

Interested in...front axle, swing arm pivot bolt with spacers/dustcaps, throttle assembly, clutch lever and perch, any misc nuts and bolts you have, and an exup servomotor working or not. You can PM me with a price including shipping to Nova Scotia Canada through the U.S. Postal Service. Thanks

i'm after the right hand side middle and Lower panels, in 2001 blue graphics if you have them... thanks D

I am needing the following for blue 00 r1 --- front fairing bracket, front fairing, middle left and right fairing and right rear view mirror....

Blue rear plastic and front fairing. PM or info@pacifichvac.com

you have a 00 front cowl in red?

need rear rotor and bolts.

Originally posted by CIRCLIP 01 rd upper,headlight PM Sent

Originally posted by new2R1 I am needing the following for blue 00 r1 --- front fairing bracket, front fairing, middle left and right fairing and right rear view mirror.... PM Sent

Originally posted by dansfamily need rear rotor and bolts. I will have to check and see

Originally posted by Free Agent I will have to check and see well let me know.

Also 98, right lower, blue

PM sent... :hellobye

Need small stuff - all the fairing bolts, 2 small pieces that connect the fairing to the frame at the front (the bolts under the clip-ons screw into them), lower radiator holder (the metal bracket), air guide (plastic above radiator), choke cable. And wiring harness will be helpful, too. PM me.

Looking for clutch lever -

birdcage and front fairing for 00 r1.

I need this stuff for a 2000-2001 a pair of stock mirrors Right rear set Front upper fairing Most right side fairings Rear solo cowl rear seat with no damage new lock set (seat, tank, ignition):2bitchsla

99 red upper fairing 99 right lower in white headlight 99 red tank mirrors lockset ignition and tank

Do you have any of the following still? V-Fairing Rear seat R. Inner Fairing R. Clip-on PM me or email at jayr00@hotmail.com

I am looking for a front rim :hellobye

Need front wheel complete....email me price and avail.

im lookin for the left side footpeg and left side shift lever for 99 R1... any help ?

Got parts? I need upper and mids to fit '01 R1

update

bump

i need a 2000 radiator to ny 11208

need clipons for both sides

Hey I need plastics, forks, headlight, radiator, fuel tank, front fender. Please email me at tomygunz7@aol.com

I need a stock undertail for a 2000-01 R1 along with the tail.

Originally posted by ninetynineR1 im lookin for the left side footpeg and left side shift lever for 99 R1... any help ? I have the leftside foot peg and bracket driver

I need a left mirror

Do you still have the starter motor?

Do you have front fairing or tail? I ned blue but any will do.

what about all the bolts/scews/nuts from the diss-assemble?

I am looking for a high mount mid pipe for a 2000.:beer

what about a gauge . i dont have anything at all and ill take what ever i can get. as far as millage goes im not to picky.

hi would ya have a 99 r1 headlight, does'nt matter if its damaged on the rhs ie brake lever side!!!! email me on gfx744@orange.net

Still have the wheels?

do you have a starter relay thats under the seat?

do u have a tank for 98 r1?

how much for the tail section shipped to 18508? do you have any pics

how much for the tail section shipped to 18508? do you have any pics :2bitchsla take a look at the date! AND he's been banned!:2bitchsla

how about a complete stator w/ wire? workink preferably.

:2bitchsla take a look at the date! AND he's been banned!:2bitchsla Why did he get Banned?

Why did he get Banned? maybe this is why:http://www.r1-forum.com/forums/showthread.php?t=175599

do you have the left and right side fairings? if so are they blue and how much?

do you have the left and right side fairings? if so are they blue and how much? I wouldn't deal with him, seems people are getting ripped off by him and he is banned.

do you have the left and right side fairings? if so are they blue and how much? you almost 'deserve' to be ripped off!:fact:dundun:

**** you blur! not everyone reads through 4 pages of posts! or like you has so much free time on their hands to read and reply to posts that dont even pertain to them! :chair:

**** you blur! not everyone reads through 4 pages of posts! or like you has so much free time on their hands to read and reply to posts that dont even pertain to them! :chair: yep, like i said.........:fact:fingr::p

Hey, I'm looking for a LEFT clear headlight lens for a 2000 R1. My bike fell over and the outer edge is cracked. Can you help? Thanks, Paul

sure, here's the one I have it's pretty much brand new. It was seperated from the right for a custom project but never got around to it. Bulb, dust cover included, all mounting tabs there...not a scratch!

How many dinero$$? Thanks for the quick reply. Paul