Translogic QS4GP help!PyRo1509 03-09-2007, 09:45 PM Traded my KLR for some cash and parts... one of them is a Translogic QS4.
Im installing it now and im a whole 3 steps into it.
Wiring up the Speedo/Tach wires now.
The manual says Speedo is "white or white/yellow" and Tach is "yellow/black"
Im wiring it up on the harness before the headlights and cluster instead of right to the cluster.
anyways the problem is.. there is both a white and a white/yellow wire...
Anyone have any tips?
1999 R1 mickr1 03-11-2007, 02:20 PM I have had a look in the manual and the white wire should go to the speed sensor then the ICU and the only white/yellow wire i can see is for the Hi/Lo dimmer switch.
Why dont you follow the wires back from the speed sensor to make sure you get the right ones.
Good luck:thumbup PyRo1509 03-12-2007, 09:55 AM I never could find the speed sensor, but I did tap the white wire @ the ECU... seemed to work :) thanks blur1 03-12-2007, 10:55 AM I never could find the speed sensor, but I did tap the white wire @ the ECU... seemed to work :) thanks
the speedsensor is a white triangular plug under the right side of the tank. PyRo1509 03-13-2007, 01:38 AM yeah.. I looked and looked and looked and say pictures and looked some more but damn it I never found it. but no worries | |