txeric77
03-23-2007, 06:26 PM
where do i get 1 and how hard is it 2 install
gear indicatortxeric77 03-23-2007, 06:26 PM where do i get 1 and how hard is it 2 install superjoe 03-25-2007, 05:59 AM You're looking for the Acumen DG8. To my knowledge they are the only makers of a standalone unit like this. It's pretty expensive though. They come in two types, one is permanently wired into the bike, one is plug and play for a little more money.
http://www.riderstation.com/DG8.php
Here's a quick link, but I would recommend looking through the ads in some moto mags on the rack, I think you can find them cheaper. txeric77 03-25-2007, 10:38 AM thanks Wheat 03-25-2007, 08:25 PM Go with a Datatool, Cheaper and a Breeze to wire in...Link (http://www.r1-forum.com/forums/showthread.php?t=194184) pedegalinha 04-21-2007, 12:43 PM Just installed my Acuman. Took about 1 hour or so to get everything working. Pretty simple. The worst part was running the wires from the spedo to under the tank. Cut my fingers on some stuff. There was probably an easier way but oh well...its on. SLVR6 04-21-2007, 03:15 PM Do any of these work when your standing still? R1LOVER 04-21-2007, 04:47 PM Acumen makes a plug n play model... no wiring needed.
CLICK HERE (http://www.motomummy.com/store/product.php?productid=16272&cat=255&page=1) to buy from a forum sponsor. itilscab 07-30-2007, 04:32 PM Mine is not programming so I checked the wiring.....the orange wire (Speedo) is supposed to go with white/yellow wire on the back of the instrument cluster. The problem is there is no white/yellow wire there. So where does the orange wire go? bradmedford 07-30-2007, 06:54 PM I have the acumen with the harness and the install is simple but the indicator realy dosent work any time you have the cluch pulled in. I paid about 160 shiped. 20 min install. make shure you do not cover the hole in the back you will need acsess to it to program it. itilscab 07-31-2007, 09:19 AM I have the acumen with the harness and the install is simple but the indicator realy dosent work any time you have the cluch pulled in. I paid about 160 shiped. 20 min install. make shure you do not cover the hole in the back you will need acsess to it to program it.
So where does the orange wire go? bradmedford 07-31-2007, 10:35 AM sorry man, I got the harness and just pluged it in. Wheat 07-31-2007, 11:39 AM Acumen makes a plug n play model... no wiring needed.
CLICK HERE (http://www.motomummy.com/acumen.html) to buy from a forum sponsor.Bad link Rhett. :) R1LOVER 07-31-2007, 01:48 PM Bad link Rhett. :)
Ya that was a while ago, that was the old site, here is the new one.
CLICK HERE (http://www.motomummy.com/store/product.php?productid=16272&cat=255&page=1) Wheat 07-31-2007, 01:58 PM Ya that was a while ago, that was the old site, here is the new one.
CLICK HERE (http://www.motomummy.com/store/product.php?productid=16272&cat=255&page=1)Dang thats alot for plug n play. Glad i know how to wire and heat shrink. :lol R1LOVER 07-31-2007, 02:05 PM Ya, you can get the wire in version like you have for 90 bucks
WIRE IN VERSION (http://www.motomummy.com/store/product.php?productid=16271&cat=255&page=1) Wheat 07-31-2007, 02:08 PM Ya, you can get the wire in version like you have for 90 bucks
WIRE IN VERSION (http://www.motomummy.com/store/product.php?productid=16271&cat=255&page=1)Much better. :) I get Datatool's for $70 bucks at my dealer. I guess it helps to know people. :D itilscab 07-31-2007, 07:00 PM So............aaaaaaaaaaaaa...............once again......... where does the orange wire go??????????? | |