Help with 2001 R1

My brother and I dropped the motor on his 2001 R1 so he could get his 2nd gear problem fixed. We labeled all hoses and wiring while we removed the motor. We were puttin the motor back into the frame last night and found that we forgot to label the ground wire from the wiring harness. Could anyone give me some insight as to where I need to bolt this one wire to???

bump

there is a black ground that normally goes onto the engine next to the starter motor....it has a ring end on the wire(like a battery cable) hope this helps....cant think of any other earths at the moment

there is a black ground that normally goes onto the engine next to the starter motor....it has a ring end on the wire(like a battery cable) hope this helps....cant think of any other earths at the moment yes this is the cable i am talking about. I will look next to the starter. I was frustrated and tired and may just have over looked it. Thanks for the help. :bow :rock

yes this is the cable i am talking about. I will look next to the starter. I was frustrated and tired and may just have over looked it. Thanks for the help. :bow :rock I think you will find it goes on the rear 8mm headed bolt that holds the starter on :thumbup :thumbup

thanks again man.