Hyperpro 04+ R1 Damper Kit Update UGRENT READ!

To all owners of the Hyperpro OEM Mount Steering damper kit for the 2004+ R1: Hyperpro has informed us that there is a washer which is missing from this specific kit (no other Hyperpro kit of any kind), and that ALL owners of the specific 2004+ R-1 OEM Mount damper kits need to install this update. It is a simple washer and bolt replacement: http://i139.photobucket.com/albums/q288/Annitori/Hyperpro%20R1%20update/R1-O001-Update-bolt-ws.jpg Here are the instructions: http://i139.photobucket.com/albums/q288/Annitori/Hyperpro%20R1%20update/R1O001Updatews.jpg http://i139.photobucket.com/albums/q288/Annitori/Hyperpro%20R1%20update/R1O001Update2ws.jpg Basically you take the old bolt out (which does not have a washer underneath it) and replace this with the new bolt and the new washer underneath and reassemble as before. This is a very simple "swap", but we have been told that it is CRITICALLY IMPORTANT that everyone who has the Hyperpro OEM Mount Steering damper kit do this update immediately. There is NO CHARGE for this update, and Hyperpro will pick up the ground shipping costs within the United States for any customer who needs this update. Contact us toll free at 1-888-963-1212 and we will get the kit sent out to you immediately. If you would like to have the instruction sheets emailed to you, please email us at info@Annitori.com, we will send them out right away. This update does not apply to ANY other damper kit from Hyperpro, no other brands, no top mounts, no "anythings" except the OEM Mount kit for the 2004+ Yamaha R1. Thanks in advance.

what does this do exactly? because i got the old bolt on mine.

what does this do exactly? because i got the old bolt on mine. It is the washer which is missing, the bolt is longer to accomodate the washer, so you need the two together...