09 520 chain infodiel11 04-19-2009, 11:44 AM Just in case anyone was interested, this is the comparison between stock chain and sprockets and a 520 kit with a EK chain, Driven sprockets.
Stock 530
Chain = 5lbs 2 oz
Rear sprocket = 1lb 13oz
Front sprocket = 10.5oz
EK chain/Driven sprockets
Chain = 4lbs 12oz
Rear sprocket = 11oz
Front sprocket = 6.75oz
After all added up you end up losing almost 2 lbs for $180. AnonymousR1 05-07-2009, 01:31 PM :thumbup Bogie 05-07-2009, 04:16 PM What sprocket sizes did you go with?? :dunno diel11 05-07-2009, 04:24 PM Stock gearing but also ordered a 16T front. Once I am finished with the engine work research I will use the 16T. Bogie 05-07-2009, 04:26 PM Stock gearing but also ordered a 16T front. Once I am finished with the engine work research I will use the 16T.
Going back and forth with going just -1 up front or -1F +1R diel11 05-07-2009, 04:31 PM Why not get the -1 front, try it, then decide if the +1 in the rear is necessary? Either way you will use the front for sure. Bogie 05-07-2009, 04:32 PM Why not get the -1 front, try it, then decide if the +1 in the rear is necessary? Either way you will use the front for sure.
Yup.....that's what I have been leaning towards. Won't cost that much to get a different rear sprocket if needed. :fact | |