02-03 Dual hi-mount Carbon MIG & Tail section

I just went back to the stock exhaust on my 02 R1. It came with a dual hi-mount setup that was once sold by Eurobikes. It is a package that includes the tail section molded to the mufflers so that they tuck tight to either side of the tail. It has carbon cans and titanium mid pipes that mate to the stock header (header not included). The tail has integrated turn signals. It's in very good condition but the tail section does have some very small cracks (eighth inch or so) at the opening of the tail light. I looked the bike over pretty good before I bought it and didn't notice these cracks until I gave it it's first wash/wax. The tail section says "R1 by MIG & Z" on both sides. I'm selling everything you need to install as pictured for $420 plus shipping. I'd also consider a partial trade for a stock tail and turn signals since I'll be without once I sell this setup. I also might consider selling the PCIII I bought since I'm back to stock now as well as the Speedohealer and smaller front sprocket (1 tooth down from stock and 520 pitch).

larger pictures?

Sorry. I had trouble reducing my picture size to comply with this post. I have plenty of pictures so if you're interested please email me at ttripodi@hotmail.com and I'll reply with pics.

Here are some pics...

sweet looking pipe. will help with sale

Here are a few more. I can be reached at 401-595-5500 if you have questions. If anyone has a line on an excellent condition stock tail section and turn signals I'd be very interested.

nice looking pipes man, i just got a carbon high mount MIG pipe with the engine i bought for my bike or i would be all over this, free bump for ya

damn this is tempting , i wish you would came out with this a week ago , got stock tail with hotbodies sbk undertail and targa solo cowl put this week b4 was stock , but i got a blue stock undertail and the turnsignals/plate fender mint condition . http://i295.photobucket.com/albums/mm143/PIMPMYFZR/IMG_1155.jpg would it be possible to get a clearer pic of the undertail please?

Dang..Id trade you for my bran new akra full exhaust i paid $1400 for- for this if I still could keep my stock tail but it looks like you NEED the aftermarket one.

Here's a picture of the undertail without the pipes on. You should be able to get a pretty high res view if you click on the thumbnail, maximize your browser window, then click on the pic again. It's pretty dirty in this pic. The rear hugger wasn't installed when I bought the bike so the previous owner may have ridden it without the hugger for a while. I'm pretty sure the pipes wouldn't fit with the stock tail. I saw a 2000 with a similar setup but it was a GYTR and the pipes were set far apart to clear the stock tail.