Got How To Suggestions?

tidbit
02-20-2003, 02:19 PM
Post your How To suggestions here. :fact If you want to ask someone to make a How To on a specific subject. This is the place to do it. :yesnod

madcow
02-21-2003, 12:24 AM
how about how to install a yellow box?? and a boxR air box? i am goin to be doing both very soon.

Tate
02-21-2003, 12:25 AM
A good one is Nubians jetting post

tidbit
02-21-2003, 12:34 AM
Originally posted by tatechesley A good one is Nubians jetting post yah.. but Nubian kinda went cold turkey... not sure how he'd feel about his info being put on this site.. if you get it cleared by him.. that would be awsome.. oh and.. the yellowbox and stuff is a great idea.. i'll be getting my undertail kit in a few days... and remaking the final prototype of my passenger peg signals.. should have a few How To's finished in the next few weeks..

tidbit
02-21-2003, 12:36 AM
all i want to see is more guys helping out with getting info into this section.. it can be very simple or complex.. remember we have a wide range of riders.. and this section should cater to them all.. :fact

TerminatorR1
02-21-2003, 12:57 PM
Nubian took his jetting thread down. My Buddy Crazy did a detailed install of the Yellow box. Maybe he could post it here.

mshumake
02-21-2003, 01:08 PM
http://www.r1-forum.com/forums/showthread.php?threadid=25876&highlight=procedure ...if someone tells me how!!! Mike

tidbit
02-21-2003, 02:06 PM
well.. if i had op powers to move it i would.. but i cant mod anything out of my section.. sorry.. maybe copy and paste it?

WetWork999
03-11-2003, 02:47 PM
I second the "How To" on the Yellow Box, and add what ratio do you set it for on an o2R1 with 2 up in the rear??? ~A

tidbit
03-11-2003, 03:51 PM
Alright.. I'll ask around for someone with a yellowbox to make a How To

orgnoi1
03-29-2003, 05:44 AM
Please post a detailed throttle cable tightening how-to if possible.....thanks!!!

tidbit
03-31-2003, 10:18 PM
ahha.. yer one lucky fool.. I'm doing that this weekend! :thumbup

rabid wombat
04-13-2003, 08:25 PM
how about a "how to install a fender eliminator and new rear signals" post? which wires are what and how to get at them.

stro3579
05-23-2003, 03:27 PM
How to synchronize 98-99 r1 carbs, with a motionpro synchronizing tool?

stro3579
05-27-2003, 04:54 PM
How do you post picture here?

tidbit
05-27-2003, 05:43 PM
hit the reply button... type in your message.. and attach image :thumbup

stro3579
05-27-2003, 08:27 PM
ok thanks alot!!

keep-up
05-27-2003, 08:30 PM
How about how to post multiple pictures in one post. I know it entails some html coding doesn't it?

keep-up
05-27-2003, 08:31 PM
I got a good one. How about a how-to on lubing you control cables? I believe there is a special gadget to do this right?

keep-up
05-27-2003, 08:32 PM
How about a changing your own tires how-to?

keep-up
05-27-2003, 08:33 PM
How about a short how-to with pics on installing your back wheel by yourself? I finally figured out how to do it without assistance but for rookies this can be a challenging feat.

keep-up
05-27-2003, 08:33 PM
How about a tapeworks decal install how-to?

keep-up
05-27-2003, 08:34 PM
I got many more!!! This is one of the best sections of the site in my opinion. Nothing like helping a brother or sister out. And brings out the creativity in all of us.

keep-up
05-27-2003, 08:38 PM
The throttle bodies/carb synch is a great one! How about a carbon fiber muffler repacking how-to? I was told today by Ron at Pipecity.com that the packing in carbon fiber cans should be repacked every 4000 miles at the most or you risk melting the resin portion of the carbon fiber due to thermal breakdown of the packing.

keep-up
05-27-2003, 08:43 PM
How about a how-to on a fork install or change out? I'm gonna do this in a few days. Perhaps I'll take some pics. Seems pretty straightforward but I bet there are some gotchas.

keep-up
05-27-2003, 08:45 PM
How about a winterizing how-to?

tidbit
05-27-2003, 11:18 PM
One at a time.. seesh :finger

keep-up
05-28-2003, 07:46 AM
You asked for it...... :lol

keep-up
05-28-2003, 08:14 AM
How about a how-to on respringing and revalving forks as suggested for us bigger guys? Or general fork overhaul?

ivanlucas
05-28-2003, 09:39 AM
how to lube cables is dead easy - no tools required. Just get a piece of polythene punch a hole in the centre, push cable through the hole and wrapp tightly around cable - using an elastic band to secure. open the top to form a polythene 'funnel' with the cable at the bottom and then squirt some 'WD40' or similar(releasing oil) and allow it to drain down into the cable. It may leak a little, but it is very effective. I have even freed cables that were siezed solid using this method. ivan Carbonfibre Yamaha R1/ Suzuki Bandit 1200 stunt bike/Kawasaki ZX6R track bike

Eclipse
09-09-2003, 11:24 AM
A how to stop Keep Up posting so many times:)

tidbit
09-12-2003, 09:31 PM
Originally posted by Eclipse A how to stop Keep Up posting so many times:) I'll second that :fact I'll be doing a few How-To's this winter.. since tidbit is actually getting off his lazy ass and buying a digital camera :fact

r6vls
11-05-2003, 12:51 AM
I like the "how to" lube your cables idea. I'm a visual learner so pictures are always worth a thousand words for me... Some other basic "how to's" that might be good for newbies would be "How to tighten your chain" (even though you can read about that in your service manual), again, the cable lubing, change brake pads, I liked the "how to apply decals" idea, and that's about all I got for now. These are relatively easy subjects to broach, but I think they're some of the most common things we do (or need to do) for our bikes so it couldn't hurt to have some discussion on it. :-)

baer42
11-07-2003, 02:19 PM
How to put signiture on the bottom of your posts.Everytime I try to post a pic it tells me it's to big.Idon't know how to make it smaller

shiftkx
02-24-2004, 11:40 AM
yea

Frontside720
04-19-2004, 12:31 PM
How to give your bike a full spring tune up. Including types of Oil...

TravRSX
08-23-2004, 02:35 PM
how to choose the right sprockets...like whether to go up 2 or 3 teeth for mild stunting....side effects of either, etc etc etc

REDD-R1
10-28-2004, 05:27 PM
Originally posted by shiftkx yea

swifttal
12-06-2004, 07:42 AM
If anyone knows how to swap '02-03 tail/lights onto an '00, that would make my day...

Thomas04R1
03-20-2005, 09:40 PM
How do i get the signature photo under my name, do i need to have a website somewhere, or can i just load a graphic into this section?

hooligan_r1
03-21-2005, 02:30 AM
How to on how to get people to check this section for how-to's, instead of having 5 or 6 posts asking how to do it every week or so. Example: changing '02 - '05 running lights into blinkers. I like helping people out with anything I can, but sometimes you end up posting the same info over and over. Not that bad, but it seems better to have the info easily accessable by reading one thread. I understand there are new people all the time, and it takes a bit to get used to how this site works, so some sort of way of letting it be known that there is a place to look first. Just my .13 cents.......

simplythebest
06-26-2005, 11:15 AM
WOW...this section is confusing. How about making this for only How-to's What the point of people asking maintenance and technical questions here, when there is another section for that.

R1/RT
09-07-2005, 08:37 PM
How do you get a personalized Avater??? How do you get your bike pic onto a URL?

SportbikerR1
12-03-2005, 08:04 PM
Originally posted by hooligan_r1 How to on how to get people to check this section for how-to's, instead of having 5 or 6 posts asking how to do it every week or so. Example: changing '02 - '05 running lights into blinkers. I like helping people out with anything I can, but sometimes you end up posting the same info over and over. Not that bad, but it seems better to have the info easily accessable by reading one thread. I understand there are new people all the time, and it takes a bit to get used to how this site works, so some sort of way of letting it be known that there is a place to look first. Just my .13 cents....... Why not make 1 sticky non postable thread where the admins point to the major how to's for the various years of r1's... that would help alot

Yves
08-01-2006, 09:34 AM
I would certainly appreciate a sticky: "Cleaning your bike 101"... I have tons of questions and let's all be honest, cleaning a bike is fidly work and takes a lot of time that we could be riding instead! * Everybody could give tips and pointers on how they clean specific parts of the bike, like the topic on chain & sprocket cleaning which already exists. * Als which are good products and less good products to use. Which will harm the bike and which won't,... How about it?

Wheat
08-09-2006, 01:07 PM
Originally posted by Yves I would certainly appreciate a sticky: "Cleaning your bike 101"... I have tons of questions and let's all be honest, cleaning a bike is fidly work and takes a lot of time that we could be riding instead! * Everybody could give tips and pointers on how they clean specific parts of the bike, like the topic on chain & sprocket cleaning which already exists. * Als which are good products and less good products to use. Which will harm the bike and which won't,... How about it? Thats not a bad idea...Let me come up with a thread tonite after work and we will give it a Shot as a Sticky and see if people can keep it clean with good post.. :thumbup

streetjester
08-09-2006, 02:03 PM
not if i see it. j/k

Wheat
08-09-2006, 08:01 PM
Originally posted by streetjester not if i see it. j/k Ill just delete your post and Ban you....:p