Anyone? How to lube the cluch cable??

Can anyone help me on how to lube the cluch cable this is the first time i've done this my Kawi.. was hydralic. Do I have to turn the adjustable dial on the handle bar all the way?

Anyone know how to do it....Please i'm in a hurry ...i wana ride!:jump

just go ride and then just lube it later. :beer

You got to get one of those $2 cable lubers...available at most bike shops; you remove the cable from the handle,insert it in the tool,tighten the knob to seal things up then insert your WD40 spray straw into the hole and quckly and slowly spray in till the juice flows at the other end...use a rag there to collect the black goo...then moves the cable by hand up and down (not absolutely required)

Thanks...so i take it you don't know how to do it..:p

Originally posted by martinc You got to get one of those $2 cable lubers...available at most bike shops; you remove the cable from the handle,insert it in the tool,tighten the knob to seal things up then insert your WD40 spray straw into the hole and quckly and slowly spray in till the juice flows at the other end...use a rag there to collect the black goo...then moves the cable by hand up and down (not absolutely required) I have the luber and the lube but how do i get the cable out?? sorry man I should know this:eek:

Remove the appropriate lower fairing... Slacken the lock-nut securing the the cable in the bracket on the engine and slip the cable out of the bracket... Bend out the tab in the cable retainer on the end of the release mechanism arm... Slip the cable end out of the retainer noting how it fits ... Screw the adjuster at the handle bar end of the cable fully into the lever bracket, then turn it out to align the slot in the adjuster with that in the lever bracket... Pull the outer cable end from the socket in the adjuster and release the inner cable from the lever... Remove the cable from the machine noting the routing and any guides or clips... Good luck :hellobye

Thats great guys...haha i have the tool and the lube...But how do I get the Damn cable out ...LOL:jump

I don't mean to sound like an ass hole, but you get the damn thing out the same way you put it in!!! Unless your talking about how to get it off your bike, then your just plain ****ing stupid and me being an ass hole is legitimate :lol :jump

Originally posted by thetool I don't mean to sound like an ass hole, but you get the damn thing out the same way you put it in!!! Unless your talking about how to get it off your bike, then your just plain ****ing stupid and me being an ass hole is legitimate :lol :jump :confused: Now, that wasn't very nice.....:no

Really,the steel cable is shrink-wrapped in a plastic housing,which runs through the steel coiled firstlayer which is covered by a thick rubber coating doubled at friction points. Lubing that cable is not a big thing...maybe once a year.

Originally posted by R1Fanatic :confused: Now, that wasn't very nice.....:no I am sowwy if I hot you feelens. It was a dumbass post for fun, no hard feewings?