R6 quarter mile times???

What should an R6 do quarter mile??? Im curious cause ill be running my R6 soon and i want to know what a good time is, i need to beat an 11.2, my mate ran that in his mazda RX3 rotor, so i cant get beaten by a car!! :fact :lol Thanks guys... :thumbup

I went to the drag strip a few weeks ago and a kid came with an 03 R6. The bike was stock except for an Akrapovic slip-on and he ran a 10.84!

11.2 will probably be tough to match on an R6. Especially if its you first time to the strip. However you can hammer it out of the hole because it doesnt wheelie like the R1. Practice your launch!!!

I have a R1 my ET= 10.63, But there was a 600 up there lowered frount and rear, he's et's= 10.3, Bike set up is improtant at the drags.

The best 1000' time I have seen for an R6 was a 8.81. The majority of R6's run in the low to mid 9 sec range in the 1000 ft.

Apparently they run a 10.3 stock, so im thinking i should at least get under 11's, my bike has full yoshi system, air filter, jet kit, takasago chain with one tooth less in the rear sprocket... Fingers crossed guys!!

By the way thanks for your help guys :thumbup

while you guys are talking about quarter times... have any of ya's seen what trailly's do... i'm thinkin of taking my ktm620 down for a bit of fun... how do ya reckon it'll go... i'm hoping about 14ish

Just mono the strip.... i wanna do one normal run, then one wheeliing... :lol

there aint a R6 out there that hasnt been modded out and lowered that can run a 10.3. The fastest I have heard stock running was a 10.86 or something around a 127 or so. Just my .02 Cook

You sure dude, cause before i bought my R6 i was looking all over the net for info, and i came accross these specs put up by yamaha and it said the quarter mile time, 0-100kms etc etc... i printed it out, ive still got it somewhere... :fact

yo dude i used to have an R6 it was a 2000.... stock as and i ran 11.26 @120m/ph..... that was my fastest.... i've done 10.55 @ 132 on my 2002 R1.... no way the R6 will get in the tens stock.....

Its not stock though, Ive got my fingers crossed that it will break the 10's... full yoshi system, air filter, stage 2 jet kit, takasago chain and sprockets with one tooth less in the rear sprocket...

Here you guys go > http://www.sportrider.com/bikes/146_perf_nums/ A good rider can get R6's in the high 10's according to this magazine review.

My best friend has a bone stock 03 r6 and I have seen him run 10.78@129. That is a bone stock bike! No pipe, no power commander, nothing. He is kinda small though... like 130-135lbs. He ran this with the bike lowered a little. He dropped the fork tubes a little and strapped the back. ( the lowering strap and links had not came in yet) I can post a time slip later if anyone wants to see it. I feel for people that think a stock R6 cant run in the 10's :iamwithst

I've seen an 03 R6 completely stock run a 11 flat. He also had good 60 times. I dont recall what they were exactly, but I do remember that they were good. I've also seen in mags and on the net times around 10.5. You can go to [url]www.motorcyclesuperstore.com and at the bottom click on bike specs. Choose the year, make, model, and it'll spit out specs including 1/4 mile times along with top speed.

Thanks heaps guys!!! Im definately not gonna be happy with anythin over 11 now!! hahaha :fact

keep us posted! i want to hit up the track before winter on my 03 r6...and i'm going 100 percent stock, and NOT lowered.