took my r1 to the track for the 2nd time made a few pass mods are
hindle high mount
pc3 usd
home made air box mod
removed ais
dropped and 8-inchs in the arm
and 5 teeth up in the back
dyno 142whp at 97degrees in the dyno room
so maybe a little more on a cooler day

best past other

60' 1.568 1.546
330' 4.140 4.120
1/8 6.276 6.263
mph 114.69 114.57
1000 8.139 8.128
1/4 9.736 9.730
mph 140.27 139.67

2 other 9.81 pasts

i think i can 1.4 60foot this friday and get some 9.6 or 9.5 on motor before i put the bottle and get some 8's

:sneaky

Very nice 60' times!!! Wish i could do that. Hoping this Fri (at Valdosta, Ga.) is the charm -- finally went to 6" over and got 168RWHP and 102TQ SAE on the Dyno...

i'll be there on friday to see it

Nukedog:What mods do you have thats a lot of tq and good whp , do you have FI





young: i was at the nopi show running on the 27th at mir

but my home track is virginia motorsports park and ill be there friday

Originally posted by DLB1994
Nukedog:What mods do you have thats a lot of tq and good whp , do you have FI


All Busa's are FI. I have a Yosh RS3 SS full system, small box mod, BMC air filter.

Everybody said the Yosh wasn't that good but it was 88 degrees the day they ran it and beat all the Brock/Hindle pipe Busa's...

I thought he was asking if you had forced induction ( FI )

Originally posted by Jsears8
I thought he was asking if you had forced induction ( FI )

yeh i was

but i didnt know he had a busa

You can't fully simulate Forced Induction on a dyno anyways so that beneft wouldn't show...

Originally posted by DLB1994
took my r1 to the track for the 2nd time made a few pass mods are
hindle high mount
pc3 usd
home made air box mod
removed ais
dropped and 8-inchs in the arm
and 5 teeth up in the back
dyno 142whp at 97degrees in the dyno room
so maybe a little more on a cooler day

best past other

60' 1.568 1.546
330' 4.140 4.120
1/8 6.276 6.263
mph 114.69 114.57
1000 8.139 8.128
1/4 9.736 9.730
mph 140.27 139.67

2 other 9.81 pasts

i think i can 1.4 60foot this friday and get some 9.6 or 9.5 on motor before i put the bottle and get some 8's

:sneaky drop 5 teeth in the back?

adding 3 teeth to back is same as taking 1 from front. give better acceleration and will take away from top speed. up 5 would be same almost as down 2 in front.

Originally posted by 1longR1
adding 3 teeth to back is same as taking 1 from front. give better acceleration and will take away from top speed. up 5 would be same almost as down 2 in front. he said drop not add:hellobye

Originally posted by DLB1994

dropped and 8-inchs in the arm
and 5 teeth up in the back


reread again...

Originally posted by 1longR1
reread again... :owwn3d

lol. not like that. being dislexic i do that all time. tis all good bambooi. :rock
and he may have edited post and fixed it.

dlb1994, can i see a pic of your bike..?

1

2

3

got the bottle on it now :rock

1