Yamaha R1 Forum: YZF-R1 Forums - View Profile: SySt

SySt SySt is offline

I eat my R1

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. wmcdonal
    02-01-2017 12:40 AM - permalink
    wmcdonal
    Hi

    Do you have a list of the CAN message numbers and the data positions.
    I have connected a Teensy 3.2 with a CAN chip and Micro SD card.
    Any help on the CAN messages would save me a bunch of time.

    Thanks

    Wayn
  2. dudule
    12-03-2016 07:54 AM - permalink
    dudule
    Hi,

    I added a post in one of your topics:
    http://www.r1-forum.com/forums/409-y...rotocol-2.html

    I'm very interested by your work. I'm working on a small system which premits on one hand to completely remove the ABS Control Unit and, on the other hand, to set up the effective rolling diameter depending on the tyres used.
    The first test with a racing ECU (YEC) are OK. Now I want to try with a genuine ECU. As by removing the ABS, will result in alarm message on th edashboard, I want to send the "right message" on the CAN bus to simulate the ABS presence.
    Do you have any information about that?

    Thank you in advance for your feedback.

    (Sorry for my English, I'm frenchie!)

    Dudule

  About Me

  • About SySt
    Bike
    2007 R1

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 03:58 PM
  • Join Date: 05-15-2008

  Friends

Showing Friends 1 to 2 of 2
  • boostednosR1
    • boostednosR1 is offline
  • burn-z
    • burn-z is offline

  Mentions

01-11-2017
07:24 AM - tlrskunk mentioned SySt in post FS: 15-16 R1/M Arrow Full Titanium Exhaust System - $1000 + Shipping
...is is for sure a Ti system and not Stainless?...
11-03-2016
07:29 AM - tlrskunk mentioned SySt in post FS: 15-17 R1/M Rotobox Carbon Fiber Wheel Set
SySt

  Quotes

06-23-2017
02:01 PM - SySt quoted P.K.1000r in post 200 tire on 16 r1
The M comes with an Ohlins rea...
06-13-2017
03:31 PM - Ds_2105R1 quoted SySt in post Anyone fitted a ccu to standard r1 yet?
... the flight control systems for the F22 Rapto...
01:45 PM - SySt quoted Ds_2105R1 in post Anyone fitted a ccu to standard r1 yet?
No, I do not agree with this, ...
06-07-2017
01:39 PM - Ds_2105R1 quoted SySt in post Anyone fitted a ccu to standard r1 yet?
...ve designed several systems which use IMUs to...
12:35 PM - fastrob691 quoted SySt in post Anyone fitted a ccu to standard r1 yet?
Unfortunately, 5 degrees ...
10:32 AM - SySt quoted fastrob691 in post Anyone fitted a ccu to standard r1 yet?
I gotcha, when I was tuning Evo...
06-01-2017
10:25 AM - RVCR1 quoted SySt in post Anyone install FT blipper on R1S..
However, their customer s...
10:17 AM - SySt quoted yamaharandy in post Anyone install FT blipper on R1S..
if you listen to some of the ven...
05-14-2017
05:07 PM - kevosr1 quoted SySt in post Has anyone tried the Motoholders air duct?
I have the Motoholders ai...
05-06-2017
06:53 PM - R1@150@alltimes quoted SySt in post R1M "YUBI" Racing
Do yourself a favor and g...
06:48 PM - SySt quoted R1@150@alltimes in post R1M "YUBI" Racing
So I went to yoyodyne to pick up cor...
07:41 AM - y32dsm quoted SySt in post How good is KYB front forks comparing to aftermarket cartridges?
In general, aftermarket s...
05-05-2017
05:58 AM - SySt quoted y32dsm in post How good is KYB front forks comparing to aftermarket cartridges?
I am slow an advanced rider...
04-27-2017
02:55 PM - Tad158 quoted SySt in post FlashTune ECU Flashing Interface
Tad, what does your AFR t...
05:47 AM - SySt quoted Tad158 in post FlashTune ECU Flashing Interface
Different gearing runs at a...
04-14-2017
07:44 PM - Hooli quoted SySt in post Brembo RCS19
...pistons. A balanced system is essential.
03-30-2017
07:46 AM - dimamxm quoted SySt in post My 15 R1 engine blew with 2888 miles!
The bearings and pistons ...
05:54 AM - SySt quoted dimamxm in post My 15 R1 engine blew with 2888 miles!
The tech and I at the dealer...
03-29-2017
09:08 AM - MotoMillion quoted SySt in post PZ racing lp400 laptronic
Has anyone had anything t...
05:47 AM - SySt quoted SBK Unlimited in post PZ racing lp400 laptronic
We've got a pro team testing this ...
 
For the best viewing experience please update your browser to Google Chrome