Yamaha R1 Forum: YZF-R1 Forums banner

Don't know what i'm doing

1K views 18 replies 12 participants last post by  iGoldeneye 
#1 ·
I took my 08R1 completely apart to add some race farings. When I took the the front apart, I have no idea where things go back. Can anyone help? I know where the upper stay goes, but I have no clue where the ohlins damper goes as well as how it connects to the bike since I added some clip-ons
 
#17 ·
Really ****ing helpful guys, nicely done. :shake

bre9853, the steering damper was connected to the stay and the left clipon from the factory, now you have changed bars you don't have the left mounting point.
What you need is an after market mounting bracket that will clamp round the forks. There are a few options available if you search around, but here's a link to one I know works well, as it's the one I have.

https://www.motomummy.com/index.php...&search_in=all&search_str=Graves+damper+clamp
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top