» Site Navigation |
|
» »
»
» Motorcycle Forums
|
|
Appearance & Mods Looks is important. Ask here for help on, flushmounts, undertails, bodywork, exhaust models etc
|
 |
|
 |
11-21-2012, 03:30 PM
|
#101
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 4,911
|
question Shane : will the position of this bung enable us to run DJ's AUTOTUNE bosch 02 sensor? or do we need to re/re as with LeoVince y-pipe.?.
I would make this very high in my decision making i should say... i would hate to have to tarnish such a beautiful piece with
and expensive weld job after the fact... 
lookin' SICK!
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp  {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
Last edited by bacchus40; 11-21-2012 at 03:33 PM.
|
|
|
|
Sponsored Links
|
Advertisement
|
|
|
11-21-2012, 03:45 PM
|
#102
|
|
tHE GODFATHER
Join Date: Feb 2002
Bikes: R1 - R6 - YZF's
Location: Canton, Ga.
Posts: 30,045
|
I am not sure what Leo has.. Our Y pipe is dual bunged ... The lower opening is for the stock setup the upper is for DJ autotune sensors... Out the box!
Sent from my iPhone using Motorcycle.com App
|
|
|
|
11-21-2012, 03:47 PM
|
#103
|
|
tHE GODFATHER
Join Date: Feb 2002
Bikes: R1 - R6 - YZF's
Location: Canton, Ga.
Posts: 30,045
|
Just to clarify the picture you posted is the DynoJet sensor I've not mounted my Pc5 and auto tuner yet .. That why its capped.. The stock sensor is installed by routing it over the swingarm and plugged into the top bung. 
Sent from my iPhone using Motorcycle.com App
|
|
|
|
|
11-21-2012, 03:56 PM
|
#104
|
|
You don't impress me.
Join Date: Nov 2011
Bikes: 2011 Raven
Location: So Cal
Posts: 531
|
I'm wondering if all of this is very simple. Changing out the exhausts, I mean. I'm kinda new at that type of thing; I'm sure there's a "how to" on here somewhere. Is it doable for the average joe, or is it something I should spend the money on getting it taken care of professionally?
Personally, I love doing things myself. That part of the reason why I love bikes so much, there's so much you can do.
__________________
Nobody said life was easy. Dig your claws into the bedrock, turn against the hurricane and STAND. 
|
|
|
|
|
11-21-2012, 05:04 PM
|
#105
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 4,911
|
Quote:
Originally Posted by SpidermanSS
Just to clarify the picture you posted is the DynoJet sensor I've not mounted my Pc5 and auto tuner yet .. That why its capped.. The stock sensor is installed by routing it over the swingarm and plugged into the top bung.
Sent from my iPhone using Motorcycle.com App |
beautiful!, i actually wondered after i posted. that is awesome you guys went ahead with that... i figured you'd be running auto-tune as well.! 
great minds think alike.!! thanks for the quick response.!! alright.. you've got me... i'll make the switch in a year.. or when you run a must have sale! yah know.. just for us r1-Forum members!!    
Saphexus, yeah its very much doable for your avg joe... just gotta have the right tools, 2 or 3 wrenches & appropiate allen keys gets it done...
its a 3-4 beer job if you like everything to line up properly.. maybe more if its a full system... just work your way from the oem exhaust cans toward the front of the bike {cans, cats y-pipe, header} piece by piece till the whole thing is off... install new exhaust in reverse order.. pretty straight forward... always leave a bit of room to move and adjust as you go along... always finish with the cans themselves... each exhaust system comes with a full installation diagram and in most cases little tidbits to look for... LeoVince, Graves & Akrapovic are among the best exhaust in the market.. and for the most part, all are exact fit 100% like oem... and look & sound great with excellent performance increase... i would not wanna ride a xplane with stock exhaust...
that's really a very clean solution Shane! the oem bung location really is a crappy place for the bosch sensor..
its gotta be shown for braggin' rights but i would have def. liked to have it further back in the y-pipe so its out of the way of the rear brake...
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
Last edited by bacchus40; 11-21-2012 at 05:19 PM.
|
|
|
|
|
11-21-2012, 07:14 PM
|
#106
|
|
You don't impress me.
Join Date: Nov 2011
Bikes: 2011 Raven
Location: So Cal
Posts: 531
|
Quote:
Originally Posted by bacchus40
...its a 3-4 beer job if you like everything to line up properly.. maybe more if its a full system... just work your way from the oem exhaust cans toward the front of the bike {cans, cats y-pipe, header} piece by piece till the whole thing is off... install new exhaust in reverse order.. pretty straight forward... always leave a bit of room to move and adjust as you go along... always finish with the cans themselves... each exhaust system comes with a full installation diagram and in most cases little tidbits to look for... LeoVince, Graves & Akrapovic are among the best exhaust in the market.. and for the most part, all are exact fit 100% like oem... and look & sound great with excellent performance increase... i would not wanna ride a xplane with stock exhaust...
|
Thanks bro, that's what I thought, just wasn't sure. I'll be saving my money through the winter for this...
__________________
Nobody said life was easy. Dig your claws into the bedrock, turn against the hurricane and STAND.
|
|
|
|
|
11-21-2012, 08:38 PM
|
#107
|
|
tHE GODFATHER
Join Date: Feb 2002
Bikes: R1 - R6 - YZF's
Location: Canton, Ga.
Posts: 30,045
|
I have a install video that is a quick summary of things I'll post in a few days 😉
Sent from my iPhone using Motorcycle.com App
|
|
|
|
|
11-22-2012, 02:41 PM
|
#108
|
|
R1 pilot
Join Date: May 2012
Bikes: 08 Candy Red R1
Location: OK
Posts: 487
|
If you can make these look this good on on 07-08, I will buy these. I love the way these look. Everybody else's cans are just too long and they look retarded. Even the Akra cans. I don't want to spend that much to just have to shorten the cans.
|
|
|
|
|
11-22-2012, 07:50 PM
|
#109
|
|
Crossplane Courage
Join Date: Jul 2012
Bikes: 2012 Yamaha R1
Location: Toronto, Ontario, Canada
Posts: 5
|
Hey SpidermanSS how are the slipons attached to the mounts they use? Are the mounts glued to the slip ons or are they riveted? Or fastened to the cans another way? Im just curious as to the strength of the strapless mounts and how they will last after a while. Any help is appreciated. thanks
|
|
|
|
|
11-22-2012, 08:41 PM
|
#110
|
|
look for special phrase here
Join Date: Jul 2009
Bikes: 09 r1 from the DARKSIDE
Location: WI
Posts: 8,205
|
I can't answer that for him, but I've got 2brothers (please go ahead and laugh  ) w/ over 20k miles on them. They aren't anywhere close to the build quality of Graves  So I wouldn't worry about them lasting
__________________
Quote:
Originally Posted by Meister37
Quit shaking your head, you're creating a draft!
|
The Man, The Legend Uncle P 
Phantom Squadron CO Check Out Phantom Squadron Here
|
|
|
|
|
11-23-2012, 02:11 AM
|
#111
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 4,911
|
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
|
|
|
|
|
11-23-2012, 05:55 AM
|
#112
|
|
look for special phrase here
Join Date: Jul 2009
Bikes: 09 r1 from the DARKSIDE
Location: WI
Posts: 8,205
|
__________________
Quote:
Originally Posted by Meister37
Quit shaking your head, you're creating a draft!
|
The Man, The Legend Uncle P
Phantom Squadron CO Check Out Phantom Squadron Here
|
|
|
|
|
11-23-2012, 08:40 AM
|
#113
|
|
tHE GODFATHER
Join Date: Feb 2002
Bikes: R1 - R6 - YZF's
Location: Canton, Ga.
Posts: 30,045
|
Hope everyone had a great HOLIDAY.....
The can design has been tested over the last 12 months with no failures..
|
|
|
|
|
11-23-2012, 09:06 AM
|
#114
|
|
tHE GODFATHER
Join Date: Feb 2002
Bikes: R1 - R6 - YZF's
Location: Canton, Ga.
Posts: 30,045
|
|
|
|
|
|
11-23-2012, 09:10 AM
|
#115
|
|
..............
Join Date: May 2007
Bikes: 2012 R1 - 2007 R1 Sold
Location: Standing next to the gene pool with a bottle of bleach.
Posts: 3,609
|
Rats.
__________________
2012 Raven R1
Gilles Adjustable Rear Sets
Pazzo Shorty Levers
Shogun Frame Sliders and Swing Arm Spools
Tech Spec tank grips
Custom LED Integrated Tail Light
Graves Fender Eliminator
Spiegler Brake Lines
Watsen Flush Mounts
Graves LINK 3/4 System
Cox Radiator Guard
Flashtune Interface
"If U.S. Soldiers stop shooting at you and whip out the camera phones, it's time to run."
|
|
|
|
|
11-23-2012, 10:32 AM
|
#116
|
|
look for special phrase here
Join Date: Jul 2009
Bikes: 09 r1 from the DARKSIDE
Location: WI
Posts: 8,205
|
No rats...10% off
__________________
Quote:
Originally Posted by Meister37
Quit shaking your head, you're creating a draft!
|
The Man, The Legend Uncle P
Phantom Squadron CO Check Out Phantom Squadron Here
|
|
|
|
|
11-23-2012, 10:44 AM
|
#117
|
|
ryongchoi is my bitch...
Join Date: Dec 2002
Bikes: '12 GP Anniversary YZF-R1, '99 Red YZF-R1, '01 Champions Edition YZF-R1, '07 TTR-50, '05 Zuma
Location: Nor Cal
Posts: 5,471
|
Hey Shane. Can we get a video that lets us hear the sound and tone of the system? I'm interested to see how it compares to the other exhausts.
__________________
Noriyuki Haga - #41
|
|
|
|
|
11-23-2012, 11:23 AM
|
#118
|
|
..............
Join Date: May 2007
Bikes: 2012 R1 - 2007 R1 Sold
Location: Standing next to the gene pool with a bottle of bleach.
Posts: 3,609
|
Quote:
Originally Posted by greenstreak9205
No rats...10% off |
I pulled the trigger too early (which isn't unusual for me) and didn't get the 10% off.
__________________
2012 Raven R1
Gilles Adjustable Rear Sets
Pazzo Shorty Levers
Shogun Frame Sliders and Swing Arm Spools
Tech Spec tank grips
Custom LED Integrated Tail Light
Graves Fender Eliminator
Spiegler Brake Lines
Watsen Flush Mounts
Graves LINK 3/4 System
Cox Radiator Guard
Flashtune Interface
"If U.S. Soldiers stop shooting at you and whip out the camera phones, it's time to run."
|
|
|
|
|
11-23-2012, 01:18 PM
|
#119
|
|
Crossplane Courage
Join Date: Jul 2012
Bikes: 2012 Yamaha R1
Location: Toronto, Ontario, Canada
Posts: 5
|
Quote:
Originally Posted by SpidermanSS
Hope everyone had a great HOLIDAY.....
The can design has been tested over the last 12 months with no failures.. |
Awesome because it is a beautiful system and seriously making me consider it over the akrapovic i was going to put on. Are the graves logos stickers or metal labels?
|
|
|
|
|
11-23-2012, 02:22 PM
|
#120
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 4,911
|
Quote:
Originally Posted by david1587
Awesome because it is a beautiful system and seriously making me consider it over the akrapovic i was going to put on. Are the graves logos stickers or metal labels?
|
Shane posted this already, currently just stickers but the fancy ones are coming... funny thing is, it'll be the 1st thing i remove.! unfortunately i ran into a little issue with my LV cf cans... though there was very little heat transfer from the cf itself, the metallic decals did in fact heat up like a mofo and the whole logo was transferred to my saddle bags.!! the decals, fully melted in Reno, NV. were an absolute pain to remove after the fact...
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
|
|
|
|
| Sponsored Links |
Advertisement
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
