» Site Navigation |
|
» »
»
» Motorcycle Forums
|
|
Appearance & Mods Looks is important. Ask here for help on, flushmounts, undertails, bodywork, exhaust models etc
|
 |
|
11-23-2012, 02:54 PM
|
#121
|
|
Crossplane Courage
Join Date: Jul 2012
Bikes: 2012 Yamaha R1
Location: Toronto, Ontario, Canada
Posts: 5
|
Quote:
Originally Posted by bacchus40
Shane posted this already, currently just stickers but the fancy ones are coming... funny thing is, it'll be the 1st thing i remove.! unfortunately i ran into a little issue with my LV cf cans... though there was very little heat transfer from the cf itself, the metallic decals did in fact heat up like a mofo and the whole logo was transferred to my saddle bags.!! the decals, fully melted in Reno, NV. were an absolute pain to remove after the fact...   |
Thats why im asking. I want to know how easy it is to remove lol id rather get the stickers and just take them off. Not a fan of that logo at all.
|
|
|
|
Sponsored Links
|
Advertisement
|
|
|
11-23-2012, 03:18 PM
|
#122
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 5,055
|
hahha.. yeh,.. for the most part the stickers are easy to remove if the exhaust is brand new... like a total noob i didnt think of the fact they were metal and of course heat would transfer and ruin them once the saddle bags were on... but i could have removed them easily enough when i first got it... just grab a corner n' peel off... gooGone on a rag and you're good to go.. shouldn't leave a trace..
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp  {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
|
|
|
|
11-23-2012, 03:22 PM
|
#123
|
|
Crossplane Courage
Join Date: Jul 2012
Bikes: 2012 Yamaha R1
Location: Toronto, Ontario, Canada
Posts: 5
|
Quote:
Originally Posted by bacchus40
hahha.. yeh,.. for the most part the stickers are easy to remove if the exhaust is brand new... like a total noob i didnt think of the fact they were metal and of course heat would transfer and ruin them once the saddle bags were on... but i could have removed them easily enough when i first got it... just grab a corner n' peel off... gooGone on a rag and you're good to go.. shouldn't leave a trace..
|
Awesome thanks for the advice. I really appreciate the help. Sucks to hear about your saddle bags but you live and learn i guess. lol
|
|
|
|
|
11-23-2012, 06:52 PM
|
#124
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 5,055
|
np.
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
|
|
|
|
|
11-24-2012, 08:26 AM
|
#125
|
|
tHE GODFATHER
Join Date: Feb 2002
Bikes: R1 - R6 - YZF's
Location: Canton, Ga.
Posts: 30,114
|
Quote:
Originally Posted by david1587
Awesome because it is a beautiful system and seriously making me consider it over the akrapovic i was going to put on. Are the graves logos stickers or metal labels?
|
They are high temp stickers... The foil badges are coming in two weeks. When they come if you want a set I'll mail you some for free.
|
|
|
|
|
11-24-2012, 08:31 AM
|
#126
|
|
tHE GODFATHER
Join Date: Feb 2002
Bikes: R1 - R6 - YZF's
Location: Canton, Ga.
Posts: 30,114
|
btw... I took some sounds clips but there is some background noise.. I might try it with my phone next week..
I need to install the PC5 onto the bike.. There is a special map for the PC5 that is something special.. It's a HIGH resolution map that you won't find anywhere else 
|
|
|
|
|
11-24-2012, 08:36 AM
|
#127
|
|
I RACE U LOSE
Join Date: Oct 2011
Bikes: 2000 R1 SOLD & 2006 R1 50th Anniversary & 2012 R1 50th G.P. Anniversary#145
Location: Philly now Langhorne Pa.
Posts: 2,506
|
Quote:
Originally Posted by SpidermanSS
They are high temp stickers... The foil badges are coming in two weeks. When they come if you want a set I'll mail you some for free.
|
Could I get a set to update my full Ti/carbon system ?, it only has stickers.
__________________
'06 50th GYT-R CarbonSlipons,Akra Y Graves stacks,blockoffs,covers BMCair Bazzaz Zafm Zfi mapsw Vortex w/520ERV3 Shogun sliders Vortex rearsets Renthal med.comp Ballistic12cell Stompgrip CRG levers Galfer SBK fr&rr rotors ProboltTi  '12 50th WGP#145. Graves full Ti carbon ex,stacks,blockoffs BMCair Yosh case,oilfill,yokenut,axleblocks Renthal w/520ERV3 CRG RC2's Watsen's Shogun framesliders Renthal med.comp Ballistic8cell ProboltTi Lucky 13th R1-013Squadron Member
|
|
|
|
|
11-24-2012, 10:13 AM
|
#128
|
|
look for special phrase here
Join Date: Jul 2009
Bikes: That signature bike
Location: WI
Posts: 8,462
|
Quote:
Originally Posted by Para-327th
I pulled the trigger too early (which isn't unusual for me) and didn't get the 10% off.
|
Maybe Shane will still validate the discount for being an early customer 
__________________
Quote:
Originally Posted by Meister37
Quit shaking your head, you're creating a draft!
|
The Man, The Legend Uncle P 
Phantom Squadron CO Check Out Phantom Squadron Here
|
|
|
|
|
11-24-2012, 03:08 PM
|
#129
|
|
Timekeeper
Join Date: Jul 2011
Bikes: R1
Location: a glass house
Posts: 330
|
The black Friday code works on this! So hard not to pull the trigger on this.
|
|
|
|
|
11-24-2012, 05:42 PM
|
#130
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 5,055
|
must_not_reach_for_credit_card!
can't_resist!
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
|
|
|
|
|
11-24-2012, 06:47 PM
|
#131
|
|
Banned
Join Date: Mar 2010
Bikes: '11 FLHX, 09 YFZ450R, 07 YZ450F, 06 R1 50th
Location: in the dirt
Posts: 12,638
|
Quote:
Originally Posted by bacchus40
must_not_reach_for_credit_card!
can't_resist! |
Just do it man 
|
|
|
|
|
11-24-2012, 10:10 PM
|
#132
|
|
R1 ate me
Join Date: Feb 2007
Bikes: 09 R1, 88 YSR50, 03 XR50
Location: West Fargo, ND
Posts: 473
|
2 questions. How hard would it be to remove the stainless straps on the muffler and powdercoat them black? Does the "Link" header allow enough room to remove the oil filter without loosening or removing the whole exhaust system?
__________________
Troy
2009 R1, 1988 YSR50, 2003 XR50
|
|
|
|
|
11-25-2012, 08:25 AM
|
#133
|
|
look for special phrase here
Join Date: Jul 2009
Bikes: That signature bike
Location: WI
Posts: 8,462
|
Quote:
Originally Posted by treimche
2 questions. How hard would it be to remove the stainless straps on the muffler and powdercoat them black? Does the "Link" header allow enough room to remove the oil filter without loosening or removing the whole exhaust system?
|
__________________
Quote:
Originally Posted by Meister37
Quit shaking your head, you're creating a draft!
|
The Man, The Legend Uncle P
Phantom Squadron CO Check Out Phantom Squadron Here
|
|
|
|
|
11-25-2012, 06:43 PM
|
#134
|
|
Banned
Join Date: Apr 2012
Bikes: 2012 R1 WGP **#-1160** 08 R1, 01 CBR929, 09 DUCATI 1098, 05 GSXR 750 (sold), 06 CBR1000 (sold)
Location: NEW YORK CITY
Posts: 551
|
is this system available now to consumers? if so how much for slip ons?
|
|
|
|
|
11-25-2012, 07:04 PM
|
#135
|
|
I RACE U LOSE
Join Date: Oct 2011
Bikes: 2000 R1 SOLD & 2006 R1 50th Anniversary & 2012 R1 50th G.P. Anniversary#145
Location: Philly now Langhorne Pa.
Posts: 2,506
|
Quote:
Originally Posted by iMa Boss
is this system available now to consumers? if so how much for slip ons?
|
Check link on post #18
__________________
'06 50th GYT-R CarbonSlipons,Akra Y Graves stacks,blockoffs,covers BMCair Bazzaz Zafm Zfi mapsw Vortex w/520ERV3 Shogun sliders Vortex rearsets Renthal med.comp Ballistic12cell Stompgrip CRG levers Galfer SBK fr&rr rotors ProboltTi '12 50th WGP#145. Graves full Ti carbon ex,stacks,blockoffs BMCair Yosh case,oilfill,yokenut,axleblocks Renthal w/520ERV3 CRG RC2's Watsen's Shogun framesliders Renthal med.comp Ballistic8cell ProboltTi Lucky 13th R1-013Squadron Member
|
|
|
|
|
11-25-2012, 07:05 PM
|
#136
|
|
..............
Join Date: May 2007
Bikes: 2012 R1 - 2007 R1 Sold
Location: Standing next to the gene pool with a bottle of bleach.
Posts: 3,712
|
Quote:
Originally Posted by iMa Boss
is this system available now to consumers? if so how much for slip ons?
|
http://www.gravesport.com/LINK-Systems.html
Cross posted with you Kurt.
__________________
2012 Raven R1
Gilles Adjustable Rear Sets
Pazzo Shorty Levers
Shogun Frame Sliders and Swing Arm Spools
Tech Spec tank grips
Custom LED Integrated Tail Light
Graves Fender Eliminator
Spiegler Brake Lines
Watsen Flush Mounts
Graves LINK 3/4 System
Cox Radiator Guard
Flashtune Interface
"If U.S. Soldiers stop shooting at you and whip out the camera phones, it's time to run."
|
|
|
|
|
11-25-2012, 08:15 PM
|
#137
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 5,055
|
Quote:
Originally Posted by ss55539
Just do it man |
NOH! 
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
|
|
|
|
|
11-27-2012, 11:46 AM
|
#138
|
|
My R1 Owns Me
Join Date: Jul 2009
Bikes: '09 White/Red R1 & '08 Track ZX-6R
Location: Covington, GA
Posts: 1,126
|
It's done, new link 3/4 system purchased. Can't wait. This mean I've got another 3/4 system to sell, along with a Graves titanium y-pipe.
__________________
2009 R1
OEM Solo Cowl
Graves LINK 3/4 Slipons
Flash-Tuned ECU
PC-V
Quick Shifter
ASV Shorty Levers
Low Profile Smoke Signals
Integrated Smoke Taillight
Hot Bodies Smoke Screen
2008 Track ZX-6R
Vortex Clip-Ons
Arata Rearsets
Woodcraft Case Covers
Ohlins 25mm "Kit" Forks
WP "Kit" Rear Shock
Goodridge Braided Lines
Versah RJL Racing Pads
Dunlop Q2's
Woodcraft Dual Temp Gen II Warmers
Full Titanium Arata Exhaust
Vortex V3 Rearsets
Vortex Gas Cap
Vortex Front & Rear Sprockets
BMC Race Filter
|
|
|
|
|
11-27-2012, 10:43 PM
|
#139
|
|
kickin' at the darkness
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 5,055
|
good man, pics!
__________________
'09 R1
weighs 420lbs, 160rwhp!
Dynojet PCV
Leo Vince EVOII sbk CF cans / tips
Leo Vince y-pipe [cat elim]
GYTR air filter
graves AIS block off plates
ECUnleashed w/ Custom Tune, 158rwhp {thanks Nels!}
SHORAI LFX18 Lithium-Iron LiFePO4
SHOGUN no-cut frame slider kit
GB RACING case covers
GYTR screen
tidy tail
Watsens
6000k HID
GYTR Comfort seat
RACETECH springs forks / shock
RACETECH Gold Valve, shock
OHLINs FORK PISTON KIT
Carbon Lorraine pads
HEL SS lines
|
|
|
|
|
11-28-2012, 04:14 AM
|
#140
|
|
I eat my R1
Join Date: Aug 2009
Bikes: 2009 YZF-R1
Location: Columbus, Ohio
Posts: 1,095
|
so are these gonna be like the volocity stacks where there is no dyno numbers at all for next 4 years? was intrested to see what kind of gains the header give vs cost.
__________________
1983 yamaha xj550 (SOLD)
1995 kawasaki gpz1100 (engine fail)
2009 yamaha r1 (30k and still rockin)
2006 suzuki gsxr600 (sold)
1981 yamaha xs450 (sold)
2003 honda superhawk 996 (for sale)
|
|
|
|
| Sponsored Links |
Advertisement
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
