09-12 R1 Stock Airbox Mod - Page 2 : Yamaha R1 Forum
» Insurance
» Yamaha R1 Prices
» Sponsors

Appearance & Mods Looks is important. Ask here for help on, flushmounts, undertails, bodywork, exhaust models etc

Reply
 
Thread Tools Display Modes
Old 12-03-2012, 02:38 PM   #21
bacchus40
kickin' at the darkness
 
bacchus40's Avatar
 
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 6,143
awesome.! thanks for diving in... looking forward to the pics!...
__________________
'09 R1
420lbs @ 160rwhp!

Dynojet PCV, DJ AT-200, Leo Vince EVOII SBK/ARROW SS HEADER, GRAVES STACKS, GYTR , graves AIS, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, RK520, JT (japan) 15T/44T, Lithtech chain adjust, ANNITORI RL qs,
CLEVER WOLF tank CF, RIZOMA sportline grips, APEX adj. clip-ons, CRG Arrows, GYTR seat, SHOGUN no-cut, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLINs FPK, CL SBK5/RX3, HEL SS lines
bacchus40 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 12-03-2012, 04:06 PM   #22
Navyguy09R1
My R1 eats me.
 
Join Date: Aug 2011
Bikes: Yellow and Black 09 R1; Black 09 FZ6
Location: Honolulu
Posts: 20
Do you know what your dyno numbers are before you do the install? I can't wait to what the increase will be!
Navyguy09R1 is offline   Reply With Quote
Old 12-19-2012, 08:11 AM   #23
bryan niles
performance first
 
bryan niles's Avatar
 
Join Date: Sep 2003
Bikes: 2005 Raven, 2010 Raven
Posts: 2,886
Talking

The ram air tubes are on there way. Have sanded and painted the plenum flat black with clear coat not like anyone is going to see it haha. Will Do the same with the tubes. After that its just the upper fairing.
__________________
PERFORMANCE- Sato full Titanium exhaust with MOTO GP carbon fiber Titanium cans- Gold Sato rearsets- Bmc race filter - Factory pro velocity stacks- Pc3USB- Powercommander Ignition module- secondary throttle plates removed- Brembo 19x18 radial master cylinder- DID 520 ERV3 conversion kit- RRP rear sprocket- Attack Performance magnesium triple clamps- Braking wave rear rotor- JG1 custom map- Gilles chain adjusters and lifters- Galfer stainless steel black front & rear brake line- Scotts oil filter-graves fibers-yec clutch springs-Galfer Superbike Wave Rotors-Ohlins damper-Active quick turn throttle billet black-Over adjustable racing linkage-Krankvent-Yec fuel regulator!

COSMETIC- Pro bolt and Yoyodyne titanium bolts and nuts on entire bike- Puig double bubble screen- Graves smog plates- Greggs customs black sprocket cover- Greggs customs black mirror block plates- Greggs customs black license plate bracket- Greggs Satin black fairing plugs- Factory yamaha billet engine case cover- Woodcraft case covers- CRG silver gp perch clutch lever- Gytr clutch guard- Speedohealer- Shogun clutch slider- Shogun black bar ends- Shogun black swingarm sliders- Motowheels red oil cap and drain plug- Rizoma black anodized front and rear brake reservoir- Agras red front axle sliders-Yoyodyne frame sliders-Samco red coolant hose kit-Evolution Composites Carbon Fiber tank cover and panels!

more to come!
bryan niles is offline   Reply With Quote
Old 12-19-2012, 12:04 PM   #24
CMRAsloguy
I eat my R1
 
CMRAsloguy's Avatar
 
Join Date: Apr 2011
Location: Missouri, USA
Posts: 301
"09-12 r1 STOCK airbox mod"






....we're not derailed... we're just not on the original route we set out on
__________________
CMRAsloguy is offline   Reply With Quote
Old 12-19-2012, 12:12 PM   #25
AKDMA
I eat my R1
 
Join Date: May 2012
Bikes: 2011 Raven R1
Location: WNC
Posts: 1,712
PLEASE dyno the bike before and after! Be nice to know for sure the potential gains.

Sent from my SGS3
AKDMA is offline   Reply With Quote
Old 01-01-2013, 08:58 AM   #26
bryan niles
performance first
 
bryan niles's Avatar
 
Join Date: Sep 2003
Bikes: 2005 Raven, 2010 Raven
Posts: 2,886
Update. I got the ram air tubes and painted them. put up a few pics of them. just looking at them its obvious that they can flow way more air. Next on the list is the body work and a pc5 and sfm.
Attached Thumbnails
Click image for larger version

Name:	intake 3.jpg
Views:	179
Size:	350.5 KB
ID:	479499   Click image for larger version

Name:	intake 1.jpg
Views:	168
Size:	401.1 KB
ID:	479500   Click image for larger version

Name:	intake 2.jpg
Views:	163
Size:	395.2 KB
ID:	479501  
__________________
PERFORMANCE- Sato full Titanium exhaust with MOTO GP carbon fiber Titanium cans- Gold Sato rearsets- Bmc race filter - Factory pro velocity stacks- Pc3USB- Powercommander Ignition module- secondary throttle plates removed- Brembo 19x18 radial master cylinder- DID 520 ERV3 conversion kit- RRP rear sprocket- Attack Performance magnesium triple clamps- Braking wave rear rotor- JG1 custom map- Gilles chain adjusters and lifters- Galfer stainless steel black front & rear brake line- Scotts oil filter-graves fibers-yec clutch springs-Galfer Superbike Wave Rotors-Ohlins damper-Active quick turn throttle billet black-Over adjustable racing linkage-Krankvent-Yec fuel regulator!

COSMETIC- Pro bolt and Yoyodyne titanium bolts and nuts on entire bike- Puig double bubble screen- Graves smog plates- Greggs customs black sprocket cover- Greggs customs black mirror block plates- Greggs customs black license plate bracket- Greggs Satin black fairing plugs- Factory yamaha billet engine case cover- Woodcraft case covers- CRG silver gp perch clutch lever- Gytr clutch guard- Speedohealer- Shogun clutch slider- Shogun black bar ends- Shogun black swingarm sliders- Motowheels red oil cap and drain plug- Rizoma black anodized front and rear brake reservoir- Agras red front axle sliders-Yoyodyne frame sliders-Samco red coolant hose kit-Evolution Composites Carbon Fiber tank cover and panels!

more to come!
bryan niles is offline   Reply With Quote
Old 01-01-2013, 09:00 AM   #27
AKDMA
I eat my R1
 
Join Date: May 2012
Bikes: 2011 Raven R1
Location: WNC
Posts: 1,712
Very cool. Going to be interesting indeed seeing the results. Wish we had a high volume airbox.

Sent from my SGS3
AKDMA is offline   Reply With Quote
Old 01-01-2013, 10:28 AM   #28
SoloStunna99
I eat my R1
 
SoloStunna99's Avatar
 
Join Date: Nov 2010
Bikes: '11 r1
Location: Durham, NC
Posts: 195
Very interested to see how this turns out...!!!
__________________
STOLEN - '04 CBR1000rr
STOLEN - '04 GSXR1000
SOLD - '05 R1
SOLD - track whore - '08 CBR1000RR
SOLD - '09 R1
track whore - '11 r1 (flashed ECU)
SoloStunna99 is offline   Reply With Quote
Old 01-02-2013, 07:56 AM   #29
bryan niles
performance first
 
bryan niles's Avatar
 
Join Date: Sep 2003
Bikes: 2005 Raven, 2010 Raven
Posts: 2,886
Talking

I tried getting a bigger airbox but have not heard back about it. Would have been perfect.
__________________
PERFORMANCE- Sato full Titanium exhaust with MOTO GP carbon fiber Titanium cans- Gold Sato rearsets- Bmc race filter - Factory pro velocity stacks- Pc3USB- Powercommander Ignition module- secondary throttle plates removed- Brembo 19x18 radial master cylinder- DID 520 ERV3 conversion kit- RRP rear sprocket- Attack Performance magnesium triple clamps- Braking wave rear rotor- JG1 custom map- Gilles chain adjusters and lifters- Galfer stainless steel black front & rear brake line- Scotts oil filter-graves fibers-yec clutch springs-Galfer Superbike Wave Rotors-Ohlins damper-Active quick turn throttle billet black-Over adjustable racing linkage-Krankvent-Yec fuel regulator!

COSMETIC- Pro bolt and Yoyodyne titanium bolts and nuts on entire bike- Puig double bubble screen- Graves smog plates- Greggs customs black sprocket cover- Greggs customs black mirror block plates- Greggs customs black license plate bracket- Greggs Satin black fairing plugs- Factory yamaha billet engine case cover- Woodcraft case covers- CRG silver gp perch clutch lever- Gytr clutch guard- Speedohealer- Shogun clutch slider- Shogun black bar ends- Shogun black swingarm sliders- Motowheels red oil cap and drain plug- Rizoma black anodized front and rear brake reservoir- Agras red front axle sliders-Yoyodyne frame sliders-Samco red coolant hose kit-Evolution Composites Carbon Fiber tank cover and panels!

more to come!
bryan niles is offline   Reply With Quote
Old 02-02-2013, 12:25 PM   #30
bryan niles
performance first
 
bryan niles's Avatar
 
Join Date: Sep 2003
Bikes: 2005 Raven, 2010 Raven
Posts: 2,886
Update. I have the PC5 and the SFM. will order the bodywork and I will have all the parts. I'm looking to do a baseline dyno run in march when it warms. Will keep u updated.
__________________
PERFORMANCE- Sato full Titanium exhaust with MOTO GP carbon fiber Titanium cans- Gold Sato rearsets- Bmc race filter - Factory pro velocity stacks- Pc3USB- Powercommander Ignition module- secondary throttle plates removed- Brembo 19x18 radial master cylinder- DID 520 ERV3 conversion kit- RRP rear sprocket- Attack Performance magnesium triple clamps- Braking wave rear rotor- JG1 custom map- Gilles chain adjusters and lifters- Galfer stainless steel black front & rear brake line- Scotts oil filter-graves fibers-yec clutch springs-Galfer Superbike Wave Rotors-Ohlins damper-Active quick turn throttle billet black-Over adjustable racing linkage-Krankvent-Yec fuel regulator!

COSMETIC- Pro bolt and Yoyodyne titanium bolts and nuts on entire bike- Puig double bubble screen- Graves smog plates- Greggs customs black sprocket cover- Greggs customs black mirror block plates- Greggs customs black license plate bracket- Greggs Satin black fairing plugs- Factory yamaha billet engine case cover- Woodcraft case covers- CRG silver gp perch clutch lever- Gytr clutch guard- Speedohealer- Shogun clutch slider- Shogun black bar ends- Shogun black swingarm sliders- Motowheels red oil cap and drain plug- Rizoma black anodized front and rear brake reservoir- Agras red front axle sliders-Yoyodyne frame sliders-Samco red coolant hose kit-Evolution Composites Carbon Fiber tank cover and panels!

more to come!
bryan niles is offline   Reply With Quote
Old 03-14-2013, 07:51 AM   #31
bryan niles
performance first
 
bryan niles's Avatar
 
Join Date: Sep 2003
Bikes: 2005 Raven, 2010 Raven
Posts: 2,886
Update. I have the race upper end lower on there way to me now from shark skinz. Next step in a few weeks is to do a baseline run.
__________________
PERFORMANCE- Sato full Titanium exhaust with MOTO GP carbon fiber Titanium cans- Gold Sato rearsets- Bmc race filter - Factory pro velocity stacks- Pc3USB- Powercommander Ignition module- secondary throttle plates removed- Brembo 19x18 radial master cylinder- DID 520 ERV3 conversion kit- RRP rear sprocket- Attack Performance magnesium triple clamps- Braking wave rear rotor- JG1 custom map- Gilles chain adjusters and lifters- Galfer stainless steel black front & rear brake line- Scotts oil filter-graves fibers-yec clutch springs-Galfer Superbike Wave Rotors-Ohlins damper-Active quick turn throttle billet black-Over adjustable racing linkage-Krankvent-Yec fuel regulator!

COSMETIC- Pro bolt and Yoyodyne titanium bolts and nuts on entire bike- Puig double bubble screen- Graves smog plates- Greggs customs black sprocket cover- Greggs customs black mirror block plates- Greggs customs black license plate bracket- Greggs Satin black fairing plugs- Factory yamaha billet engine case cover- Woodcraft case covers- CRG silver gp perch clutch lever- Gytr clutch guard- Speedohealer- Shogun clutch slider- Shogun black bar ends- Shogun black swingarm sliders- Motowheels red oil cap and drain plug- Rizoma black anodized front and rear brake reservoir- Agras red front axle sliders-Yoyodyne frame sliders-Samco red coolant hose kit-Evolution Composites Carbon Fiber tank cover and panels!

more to come!
bryan niles is offline   Reply With Quote
Old 03-15-2013, 09:47 AM   #32
asdfjklm
My R6 is better than your R1!
 
asdfjklm's Avatar
 
Join Date: Mar 2007
Bikes: White 09 R1 and Red 04 R6
Location: Belgium (used to be in FL) Holy Shyt it's cold here!!!
Posts: 654
Quote:
Originally Posted by z064life View Post
why not just cut yours?? If you want to spend money on one...do it right
I don't mind cutting mine, but I'm IN europe, if they're cheap, why not just buy one?
__________________
Rubber Down. Shiney Up.

ZW
asdfjklm is offline   Reply With Quote
Old 03-15-2013, 10:11 PM   #33
BlackShadow
Need $ for bike parts
 
BlackShadow's Avatar
 
Join Date: May 2012
Bikes: 2011 R1, and all the bikes I wish i had
Location: Hudson, Wisconsin
Posts: 3,016
Price?

Sent from Motorcycle.com App
__________________

Sig by Uncle P

I wish my Dad was alive to see some of the crazy shit I do. RIP Pops
BlackShadow is online now   Reply With Quote
Old 06-11-2013, 01:07 PM   #34
Navyguy09R1
My R1 eats me.
 
Join Date: Aug 2011
Bikes: Yellow and Black 09 R1; Black 09 FZ6
Location: Honolulu
Posts: 20
Any updates? I hope it's going well!
Navyguy09R1 is offline   Reply With Quote
Old 06-11-2013, 02:02 PM   #35
bryan niles
performance first
 
bryan niles's Avatar
 
Join Date: Sep 2003
Bikes: 2005 Raven, 2010 Raven
Posts: 2,886
I plan on doing some dyno tuning July 4 weekend. Be baseline run and tune before the superbike intake mod. Working a lot so it's taking a little time.
__________________
PERFORMANCE- Sato full Titanium exhaust with MOTO GP carbon fiber Titanium cans- Gold Sato rearsets- Bmc race filter - Factory pro velocity stacks- Pc3USB- Powercommander Ignition module- secondary throttle plates removed- Brembo 19x18 radial master cylinder- DID 520 ERV3 conversion kit- RRP rear sprocket- Attack Performance magnesium triple clamps- Braking wave rear rotor- JG1 custom map- Gilles chain adjusters and lifters- Galfer stainless steel black front & rear brake line- Scotts oil filter-graves fibers-yec clutch springs-Galfer Superbike Wave Rotors-Ohlins damper-Active quick turn throttle billet black-Over adjustable racing linkage-Krankvent-Yec fuel regulator!

COSMETIC- Pro bolt and Yoyodyne titanium bolts and nuts on entire bike- Puig double bubble screen- Graves smog plates- Greggs customs black sprocket cover- Greggs customs black mirror block plates- Greggs customs black license plate bracket- Greggs Satin black fairing plugs- Factory yamaha billet engine case cover- Woodcraft case covers- CRG silver gp perch clutch lever- Gytr clutch guard- Speedohealer- Shogun clutch slider- Shogun black bar ends- Shogun black swingarm sliders- Motowheels red oil cap and drain plug- Rizoma black anodized front and rear brake reservoir- Agras red front axle sliders-Yoyodyne frame sliders-Samco red coolant hose kit-Evolution Composites Carbon Fiber tank cover and panels!

more to come!
bryan niles is offline   Reply With Quote
Old 06-11-2013, 06:31 PM   #36
NoxImus
Tin Foil Hat
 
NoxImus's Avatar
 
Join Date: Jun 2012
Bikes: 2012 R1 Raven
Location: Fort Wayne, IN
Posts: 2,615
Are there any projected numbers for this mod? Seems like a lot of money and a bit of a PITA.

Sent from Motorcycle.com Free App
__________________

Quote:
Originally Posted by greenstreak9205 View Post
It's like kankles for your head!!

Your local HPT and EFI live tuner.
NoxImus is online now   Reply With Quote
Old 02-07-2014, 04:29 PM   #37
iGoldeneye
WERA? \_(ツ)_/ #21
 
iGoldeneye's Avatar
 
Join Date: Apr 2012
Bikes: 2012 Yamaha R1 Raven - '04 GSXR600 (track) - 2006 Yamaha R1 50th Anniversary (sold)
Location: Southern Cali
Posts: 2,247
Were there any updates on the plenum install???
__________________

Thanks Uncle P!

WERA #21

View my MOD ADDICTED 2012 R1 build thread

Quote:
Originally Posted by bacchus40 View Post

Being a biker is not a welfare sport.

Last edited by iGoldeneye; 02-07-2014 at 04:43 PM.
iGoldeneye is offline   Reply With Quote
Old 02-07-2014, 04:33 PM   #38
bacchus40
kickin' at the darkness
 
bacchus40's Avatar
 
Join Date: Nov 2006
Bikes: 2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
Posts: 6,143
,
__________________
'09 R1
420lbs @ 160rwhp!

Dynojet PCV, DJ AT-200, Leo Vince EVOII SBK/ARROW SS HEADER, GRAVES STACKS, GYTR , graves AIS, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, RK520, JT (japan) 15T/44T, Lithtech chain adjust, ANNITORI RL qs,
CLEVER WOLF tank CF, RIZOMA sportline grips, APEX adj. clip-ons, CRG Arrows, GYTR seat, SHOGUN no-cut, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLINs FPK, CL SBK5/RX3, HEL SS lines
bacchus40 is offline   Reply With Quote
Old 02-07-2014, 05:31 PM   #39
NoxImus
Tin Foil Hat
 
NoxImus's Avatar
 
Join Date: Jun 2012
Bikes: 2012 R1 Raven
Location: Fort Wayne, IN
Posts: 2,615


Sent from Motorcycle.com Free App
__________________

Quote:
Originally Posted by greenstreak9205 View Post
It's like kankles for your head!!

Your local HPT and EFI live tuner.
NoxImus is online now   Reply With Quote
Old 02-07-2014, 05:36 PM   #40
iGoldeneye
WERA? \_(ツ)_/ #21
 
iGoldeneye's Avatar
 
Join Date: Apr 2012
Bikes: 2012 Yamaha R1 Raven - '04 GSXR600 (track) - 2006 Yamaha R1 50th Anniversary (sold)
Location: Southern Cali
Posts: 2,247
Well, I just text'd a buddy that bought a WSBK plenum... He got it installed yesterday




He tilted the engine forward, but I'm going to try the throttle body route tomorrow...
__________________

Thanks Uncle P!

WERA #21

View my MOD ADDICTED 2012 R1 build thread

Quote:
Originally Posted by bacchus40 View Post

Being a biker is not a welfare sport.
iGoldeneye is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -7. The time now is 02:46 PM.



Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Motorcycle News, Videos and Reviews
Honda Grom Forum Harley Davidson Forum Honda 600RR Kawasaki Forum Yamaha R6 Forum Yamaha FZ-09 Forum
1199 Panigale Forum Roadglide Forum Honda CBR1000 Forum Vulcan Forum Yamaha R1 Forum Yamaha R3 Forum
Ducati Monster Forum Harley Forums Honda CBR250R Forum ZX10R Forum Star Raider Forum Yamaha Viking Forum
Suzuki GSXR Forum V-Rod Forums Honda Shadow Forum Kawasaki Motorcycle Forum Star Warrior Forum KTM Duke 390 Forum
SV650 Forum BMW S1000RR Forum Honda Fury Forum Kawasaki Versys Forum Drag Racing Forum Ducati 899 Panigale Forum
Suzuki V-Strom BMW K1600 Triumph Forum Victory Forums Sportbikes BMW NineT Forum
Volusia Forum BMW F800 Forum Triumph 675 Forum MV Agusta Forum HD Street Forum Suzuki GW250 Forum
Yamaha Motorcycles Victory Gunner Forum Honda Vultus Forum HD LiveWire Forum Ninja H2 Forum
R1-Forum.com is an independent Yamaha enthusiast website. Content on R1-Forum.com is generated by its users and R1-Forum.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.