AFR for auto tuning
Appearance & Mods Looks is important. Ask here for help on, flushmounts, undertails, bodywork, exhaust models etc
12-10-2012, 12:20 AM
Join Date: Jul 2012
AFR for auto tuning
Hi all just wondering what should my AFR table look like I have some 13 s up to 15% throttle and the rest 12.9 I got given this map from a friend and I am just starting to get a build up of soot on the back of my bike
The 12.9 s carry on all the way down to 15000 across to 100%
Sent from my iPhone using
Motorcycle.com Free App
12-10-2012, 01:01 AM
kickin' at the darkness
Join Date: Nov 2006
2005 RAVEN R6, sold; PEARL WHITE 2009 YZF R1 ~ rip, CADMIUM YELLOW 2009 YZF-R1!
Location: British Columbia
there's a good base map posted on graves forum, its easy enough to search for...
its better than what you've got there, that much i remember...
dont have it handy but its what i used on my 09, works beautifully!
420lbs @ 160rwhp!
Dynojet PCV, DJ AT-200, Leo Vince EVOII SBK CF cans, ARROW SS RACE HEADER, GYTR air, graves AIS, ECUnleashed, SHORAI, YOYODYNE sc, HINSON bskt, EBC SRK, RK520, JT SPROCKETS (japan) 15T/44T, Lithtech chain adjusters, ANNITORI RL qs,
CLEVER WOLF tank CF, RIZOMA sportline grips, APEX adj. 3" riser clip-ons, CRG Arrows, GYTR seat, SHOGUN no-cut, GBR covers, GYTR db, Watsens, 6000k HID, RACETECH springs, RACETECH G3-LD, OHLIN FPK, CL SBK5/RX3, HEL SS lines
12-10-2012, 09:33 AM
I RACE U LOSE
Join Date: Oct 2011
2000 R1 SOLD & 2006 R1 50th Anniversary & 2012 R1 50th G.P. Anniversary#145
Location: Philly now Langhorne Pa.
Try 13.4 up to 15% or 20%, 13.0 from 6k to 9k, and 13.2 10k and up. 13.0 in the midrange will give good response, 13.4 down low will run cleaner, 13.2 up top a little cleaner as well. I have a Bazzaz ZAFM set up similar to these #'s on my '06.
'06 50th GYT-R CarbonSlipons,Akra Y Graves stacks,blockoffs,covers BMCair Bazzaz Zafm Zfi mapsw Vortex w/520ERV3 Shogun sliders Vortex rearsets Renthal med.comp Ballistic12cell Stompgrip CRG levers Galfer SBK fr&rr rotors ProboltTi
'12 50th WGP#145. Graves full Ti carbon ex,stacks,blockoffs BMCair Yosh case,oilfill,yokenut,axleblocks Renthal w/520ERV3 CRG RC2's Watsen's Shogun framesliders Renthal med.comp Ballistic8cell ProboltTi
Lucky 13th R1-013Squadron Member
12-10-2012, 03:29 PM
Join Date: Dec 2003
1999 r1, 07 GSXR 1k
Location: Austin, TX y'all
Easy way is just doing 13.2 across the board, but you can lean it out a bit more in the lower rpm's as there is less of a load on the engine.
12-12-2012, 05:40 PM
Join Date: Feb 2002
00 r1 now 04
Run mine 13.3. But anywhere from13-13.4 should be good
R.I.P K_FleXXX June 15, 2006
2000 Turbo Hayabusa Streetbike Shootout Bike. Velocity Racing Turbo
2004 YAMAHA R1 extended arm, schnitz progressive controller 217 r.w.h.p.
dyno run on nitrous
R1-015 `Ghostrider` Squadron
may not post new threads
may not post replies
may not post attachments
may not edit your posts
HTML code is