How to switch from Fahrenheit (°F) to Celsius (°C)
I found this after looking for weeks on the related sites. I have tried it on my bike but think i may be doing something wrong in between step 4 and 5. maybe you guys are able to make it happen and share with us.
Switching over the water temperature display
1. Turn on the main switch with the “RESET” and “SELECT” buttons held down.
“Co” appears in the left of the display area for the distance and time.
2. Press the “SELECT” button. The display changes to “dIAG “.
3. Press both the “RESET” and “SELECT” buttons at the same time.
“d01: xx” appears in the display area. (A certain number is displayed in “xx”.)
4. Pressing the “RESET” button 2 times displays “d62: xx”.
The “xx” in “d62: xx” indicates which thermometric scale to display, Celsius or
I have a 2010 R1 Euro with a US spec dash, my dash doesn't have C-degrees built in, the easiest way to tell if yours does is-
With your display turned off have a look across it in the sunlight you should be able to see where the C for Celsius would illuminate, mine only has the spot for F built in.