Yamaha R1 Forum: YZF-R1 Forums banner

Search results

1-20 of 171 Results
Advanced Search
  1. 02 03 R1 Static Fuel Pressure when engine off

    02-03 R1 Mechanical Help
    And that is exactly what I thought. The minute the engine shuts off the line drops 20 psi instantly and I can see no fuel leaks... I don't see injector leaks.. If I pinch off the return line it makes only a subtle difference... WTF? I pulled the throttle bodies and ran the injector tests...
  2. 02 03 R1 Static Fuel Pressure when engine off

    02-03 R1 Mechanical Help
    Fuel pressure post engine run. Hey guys, I have a quick stupid question. Has anyone ever observed their fuel pressure and its behavior when the engine is stopped? Is it supposed to hold pressure or is it allowed to drop? Any question that would give me the answer is, when you remove your...
  3. Very Unique 2001 R1

    00-01 R1 Mechanical Help
    Your subsequent reply(s) was absolutely a personal attack - believe your BS all you want but I'm not going to give that garbage any credence whatsoever. And I'm suppose to read and take your criticism, but you don't read mine - did you really just post that obvious self-conflicted hypocrisy!? If...
  4. Any ebay fairing vendors?

    Appearance & Mods
    Ummmm what is a 4 stage clear?
  5. Very Unique 2001 R1

    00-01 R1 Mechanical Help
    Not likely - I've been writing code since 1985. I type as fast as I talk. As I had mentioned - the 'dirt' is already compound and the products you mentioned I wouldn't ever use on fresh paint... Seriously - do not use anything with silica or silicone on fresh paint especially old schools...
  6. Very Unique 2001 R1

    00-01 R1 Mechanical Help
    What's the difference between a so-called pro and a so-called amateur? You tell me what you think the difference is. Guys that do work as a profession make sure customer's work is perfect and clean - as for their own property they look for people who comprehend what they are doing and can...
  7. Thinking about buying 2001 R1

    General Motorcycle Discussions
    Yeah let an FI system sit and see what happens. Carbs definitely do not have problems more often than FI - they've been around much longer. You've just been lucky. I talk to people who never lived through carb'd bikes - know nothing about carbs and they complain about them - yet these same...
  8. spitting flames

    New Member Introductions
    I sync my TBs but it had no effect on the crap idle for my 02 03 R1. What are the symptoms of a bad T sensors? My idle is +-200 RPMS always
  9. R1 sitting for 10 years won't start

    07-08 R1 Mechanical Help
    pull the throttle bodies with everything still connected and try to start the bike - lift the TBs off while cranking the engine and see what the injectors spray looks like. Easiest way.
  10. 2002 R1 fault codes 17 & 18

    02-03 R1 Mechanical Help
    The manual will only tell you what codes are but not how to sort them out beyond replacing the exup servo motor. It won't stop the bike from running probably probably cuts back the ignition timing. 17 and 18 is exup motor defunct. Do you have the exup removed and no delete circuit installed...
  11. R1 not doing anything

    09-14 R1 Mechanical Help
    That's a bad ground / Ignition Switch / Battery Terminal Issue. The only other thing could be ECU connector or connector between ecu and the gauges. I would go after them in the order I listed.
  12. Improve my Cooling

    04-06 Performance Group
    Bikes are designed to run in the desert without overheating unless they are running way too lean. A compression bump or even a decent turbo setup won't boil it as long its tight and right. Even tracking days in boiling heat shouldn't do it... you'll boil your brakes first.
  13. Very Unique 2001 R1

    00-01 R1 Mechanical Help
    Mount is off in the pic - That's the only thing you noticed?
  14. Very Unique 2001 R1

    00-01 R1 Mechanical Help
    Huh What?
  15. Very Unique 2001 R1

    00-01 R1 Mechanical Help
    Take a good look and you'll see quite a bit of other years (newer) on this bike including quite a bit of ABS fab work among other fabrication.
  16. Please help, fuel pump issues

    00-01 R1 Mechanical Help
    I have a pump if you need one. Just make an offer.
  17. Which years engine can I put in a 99 R1 frame?

    98-99 R1 Mechanical Help
    An 02 03 Injected motor will bolt right up with some minor tweaks (No fab work needed). You would need the entire engine package - harness, ecu, gauges, throttle bodies, sensors and motor. I have one in my 2001. 1998-2001 motor mounts are the same. 02 03 are different by 1 mount so you skip...
  18. FS: 98-03 R1 YEC ECU & Stock Swingarm

    Bike Parts For Sale
    Swing arm can't be 98-03 - it can only be 98-01 or 02 to 03. They are not interchangeable without the wheel caliper etc etc... That's an 02 03.
  19. Thinking about buying 2001 R1

    General Motorcycle Discussions
    Very good point regarding who would be working on it. Indeed if you can't do the work that may be an issue. However when you say crap start that cracks me up. My 02 R1 is infinitely harder to start than my 01. The autochoke on the 02 sucks and it often has to be cranked 2 or 3 times along...
  20. Thinking about buying 2001 R1

    General Motorcycle Discussions
    Me personally I could not disagree more - parts for the 98 - 01 are everywhere are dirt cheap. Just about everything swaps accept for the upper and rear fairings, headlights and gas tank - none of which you need. Forks and triple from every year (Can't confirm 2015 and up) can fit in that...
1-20 of 171 Results