Yamaha R1 Forum: YZF-R1 Forums banner
1 - 2 of 2 Posts

·
Ghostrider Squadron
Joined
·
9,259 Posts
yes.. u can take it apart.. it has little pendulum with magnet on it.. take small dab of silicon and put it on the pendulum to keep it from moving.. then you wont have problem. or you can measure resitenance betwee it.. and just cut it off and solder in resistors of correct value.. cant remeber what it is.. but its easier to unplug it.. then is will come apart. make sure and silicon it in correct position... or bike wont start..
 

·
Ghostrider Squadron
Joined
·
9,259 Posts
mine is fixed so it doesnt cut out, but i have tether kill switch i use at track. if i fall off it kills bike. yes falling over and bike running is not good deal ever. but most of time bike will die... most of time. not all.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top