08 r1 headlight upgrade?
Join the discussion
Recommended Reading
-
Bmc filter for street riding and dyno tune numbers
Appearance & Modsso I want to make a couple more hp on my stock 2017 yamaha r1 and im looking at getting a graves cat eliminator 3/4 pipe would a bmc air filter help add a couple hp when i get it dyno tuned or should I leave the stock paper filter in . Ride all street for now- 3
- 81
-
Yz250_paul · updated
-
2005 under tail exhaust on 2003
Appearance & ModsI just scored a wrecked 03 r1 for $300 from a buddy. It needs new fairings for sure so I'm thinking about using the 05 fairings. My question is has anyone used the 05 under tail exhaust on an 03? I'm thinking I'd need to use an 05 swing arm ? Thanks in advance.- 1
- 68
-
Waiting for PCV and maybe secondary fuel Man system
Appearance & ModsAm I correct that now along with more Mods than I want to list. I am waiting To compliment the Cat back Akropovic GP exhaust on my 2020 R1. That the PCV controls the lower 4 fuel injectors? If I want to control all 8 fuel injectors I need the piggy back PCV with Secondary fuel setup? How does...- 1
- 149
-
FlashTune ECU Flashing Interface
Appearance & ModsI got the type 1 ECU flashing interface from Flashtune today. Here are the tuneable features for the 07-08 R1: -Fuel table bias (ECU uses a MAP vs RPM and a TPS vs RPM table for fueling, the bias adjusts how much each table contributes to the final value used to control the injectors.) -TPS vs...- 13K
- 1M
-
Front sprocket removal?
Appearance & Modsa lot of people recommend shoving a Phillips between the chain to stop the front sprocket from spinning, I found I either didn’t have a philips long enough, or they were too wide for the gaps in the chain... this took me a while to formulate but is super simple and even more effective. Random...- 2
- 115
Join now to ask and comment!