Yamaha R1 Forum: YZF-R1 Forums banner
1 - 1 of 1 Posts

· mines in the shop
Joined
·
95 Posts
i did the same thing with mine drilled and tapped out the elbows. i also put a thread locker compound on them and i threaded a nut on the bolt to act as pinch nut so it will not back off . never had a problem and no leaks in over a year.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top