Yamaha R1 Forum: YZF-R1 Forums banner
1 - 1 of 1 Posts

· Cool Story Bruh
Joined
·
180 Posts
Discussion Starter · #1 ·
Afternoon Gents,
I've recently had the motor rebuilt and installed in my 2006 R1 by a shop. We have encountered an idle/run issue with the bike. The bike will fire up and idle for roughly 10 seconds then slowly die. Once this happens the bike will not start again due to the plugs being soaked with gas. The only way to get the bike to fire back up for another 10 seconds is if I pull the plugs crank it over to blow out the raw fuel and throw in dry plugs. This cycle continues to repeat its self. What could be causing the bike to run so rich it fauls the plugs? Any suggestions would be greatly appreciated. I've tripple checked all my connections, hose configurations, compression checks, I'm about to pull my hair out! Hope to hear from you soon!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top