Yamaha R1 Forum: YZF-R1 Forums banner
1 - 4 of 4 Posts

· Registered
3 Posts
Discussion Starter · #3 ·
set up

Yes I know the procedure to set up sag, ride height,rebound and compresion damping,I raced for 8years on many different bikes. The R1 has the most fork travel of any bike I have set up,therefore it needs more sag( approx. 25% race and 30% for the street). The R1 stock has about 35mm of static sag without the rider. If I am to use 25mm of full sag with rider i will have to raise the forks up about 10mm in the triple clamp to keep the same angle of attack/ride height.
I just wanted to know if other R1 riders have set up there bike properly?
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.