[R1LOVER]

You need to run the winxp network setup wizzard on any computer that is hooked into the network that is not an winxp machine. This should solve your problems. With everything you have tried you may want to remove all networks on both machines and start from scratch. Winxp network setup wizard is not the best and when you have done several config's it get's confused. Anyway start with the winxp machine then the win-me.... hope this helps.

 

[R1LOVER]

Ok... good news and bad news.
I swapped out network cards and the network works.. kinda.
I can access her computer now... but not the internet...
Maybe I have something messed up with the TCP/IP portion

SET YOUR GATEWAY TO 192.168.1.1

 

[R1LOVER]

SET YOUR GATEWAY TO 192.168.1.1

THEN RUN YOUR INTERNET CONNECTION WIZARD AND SELECT "CONNECT TO THE INTERNET THROUGH YOUR LAN OR INTERNET GATEWAY"

 

[R1LOVER]

Guys, really, you do not need anything with NWLink... they are for Novell network with NetWare, and you guys don't have anything with NetWare on your networks. ImagineParadise, trust me, even if you remove all those NWLink stuff, your network will still work... :fact

What is NWLink? Click here.

Look, this is all I've in my settings(Client for MS Network, File sharing..., QoS Scheduler(you don't need this), and TCP/IP), and my network works fine with XP, 98, Me and 2000 machines all in the same network and they all can communicate with each other... :fact

:iamwithst




Here's a solution.... Remove all network drivers and remove all settings that you have messed with. get the machine back to standard settings. Then call me and I will walk you through the process. It will take at the most 20 minutes and you will be done. And yes it will work.... 800-248-4940 ext 102 daytime 7-5pm pt