Yamaha R1 Forum: YZF-R1 Forums banner
1 - 5 of 5 Posts

· Action figure sold separately
Joined
·
12,868 Posts
Discussion Starter · #1 ·
This is weird. I have 2 04s, one is a street bike, the other a track bike. Following the shift light brightness/activation/deactivation etc functions, the track bike instrument panel responds as it should, but the street bike does not. With the key in the "off" position, I press and hold "Select", then turn the key to the "on" position. Within about 5 seconds, the tach/shift light brightness display mode appears on one bike but not the other. Anyone else run into this kind of problem or have a solution? Thanks!
 

· Action figure sold separately
Joined
·
12,868 Posts
Discussion Starter · #3 ·
You only press one, not together, with the key off, and then turn the key on. It's all explained above. The strange thing is that the "select" button works for other functions.
 

· Action figure sold separately
Joined
·
12,868 Posts
Discussion Starter · #6 ·
Sabian said:
I think he's saying it won't even enter the control mode.
That's the problem.
 

· Action figure sold separately
Joined
·
12,868 Posts
Discussion Starter · #8 ·
If I can break out of a Sunday lazy stupor, I could try temporarily swapping the onstrument panels between the two bikes and see if I can verify that it's not working correctly on either.
 

· Action figure sold separately
Joined
·
12,868 Posts
Discussion Starter · #10 ·
Sabian said:
That thought just popped into my head when I clicked the link to the thread again....but that's a lot of work on Football sunday...:beer
You're talking me out of it. I guess I can cover the shift light with some tape! :beer
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top