Yamaha R1 Forum: YZF-R1 Forums banner

1 - 19 of 19 Posts

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #1
I will not part this out...


The time has come to part ways with the bike. To be honest, it was a blast building it, but I don't enjoy it as much as I'd like to between work, family priorities, etc....sadly, it sits more than it gets ridden.

With that said, the bike is in excellent mechanical condition and appearance - clean title, never been down/stunted/tracked, just miles of smiles on the back twisty roads. I've put a TON of money and time into the build, and couldn't be happier with the final outcome so I feel confident the next owner will thoroughly enjoy it.

I'm sure I'll miss some stuff, but here's a rundown of what I've done:

Mods as of 11 Jul 19:

PERFORMANCE
- Graves Link 3/4 system
- Graves Smog Block Off Plates
- Graves upper and lower velocity stacks
- BMC Street Filter
- Healtech Speedo Healer
- Quickturn throttle
- SBK Unlimited plenum
- Translogic quickshifter/auto blipper
- Translogic TLS-MD3 Micro Dash
**mileage reflects 10,218 but there was about 3,000 or so miles on the dash when I installed it if I remember correctly **

CHASSIS
- Ohlins FGRT 206 Forks
- Ohlins rear shock
- Sato adjustable shock link
- Marchesini M7RS Wheels
- Dunlop Tires
- D.I.D EK MVXZ Gold Chain
- Renthal 15t Front Sprocket
- Superlite 43t Rear Sprocket w/ Ti Mounting Hardware
- Rizoma Rearsets w/ Rizoma Race Pegs w/Ti Mounting Hardware
- Rizoma Spring Return Kit
- Renthal Clip-ons w/ Ti Hardware
- Renthal Grips
- Lightech Chain Adjusters w/ Ti Mounting Hardware
- Attack Lifters w/ Ti Mounting Hardware
- Evotech Yoke Nut
- Ti Top/Bottom Triple Clamp Pinch Bolts
- Ti Subframe Bolts
- Ti Rear Axle Bolt

BRAKES & CLUTCH
- Beringer 6 Piston Front in red/2 Piston Rear in red Calipers w/Brembo mount w/ Ti Hardware (Banjos & Mounting Bolts)
- Brembo 19x18/19x20 RCS Master Cylinder w/ Ti Mounting Hardware
- Master Cylinder Reservoir Kit Front
- Harris Clutch Perch w/ Brembo Lever w/ Ti Mounting Hardware
- New clutch fibers, steels, and springs (Graves kit)
- HEL Front / Rear SS Brake Line in red w/ Black Quick Disconnects
- Braking SK Front Rotor / SBK Unlimited Rear w/ Ti Hardware

BODY
- Zero Gravity Corsa Wind Screen
- Luimoto suede seat cover w/ gel insert
- Yamaha OEM Solo Cowl
- MDI Carbon Inner Side Panels
- MDI Carbon Dash Trim
- MDI Carbon Tank Panels
- MDI Carbon Swingarm Covers
- WSBK Carbon hugger
- Cox Racing Radiator Guard
- Lightech Quarter Turn Gas Cap
- DZUS Fasteners
- Sato No Cut Frame Sliders
- Sate Front Axle Sliders
- GB Case Covers
- A&R HID Kit
- Watsen Flush Mounts
- Motodynamic Integrated Taillight
- Yoshimura Fender Eliminator
- Rizoma Oil Cap


Asking $13,000 OBO
 

Attachments

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #3
If I was rich...


lol everything is negotiable brother.

On a serious note, it’ll be a hell of a buy for whoever gets it.


Sent from my iPhone using Tapatalk Pro
 

·
I miss my R1
Joined
·
3,098 Posts
lol everything is negotiable brother.

On a serious note, it’ll be a hell of a buy for whoever gets it.


Sent from my iPhone using Tapatalk Pro
Well part of the problem is I'm still paying for my S1000R, and the other problem is the Canadian dollar is junk :p

Your bike would cost more than my BMW did ;)

Still, it's not secret on here how big a fan I am of WGP50 bikes and yours is one of the nicest I've seen (for sale or otherwise)

GLWS!
 

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #5
Well part of the problem is I'm still paying for my S1000R, and the other problem is the Canadian dollar is junk :p



Your bike would cost more than my BMW did ;)



Still, it's not secret on here how big a fan I am of WGP50 bikes and yours is one of the nicest I've seen (for sale or otherwise)



GLWS!


I gotcha man, I’ve dealt with a few different exchange rates over the years so I totally get it. Besides, it sounds like you e got a nice beast in the garage already! And thanks for the kind words, I appreciate it!!


Sent from my iPhone using Tapatalk Pro
 

·
Take the red pill
Joined
·
6,823 Posts
Excellent bike, excellent mods (all the right ones), especially the stacks, suspension, and wheels. I wouldn't take a penny less than advertised price as it's worth every dime. That's a turnkey completely modded bike with very expensive parts. Bike + his parts (My bike is extremely similar) is well over 20k. 13k is a steal, especially given current new bike prices. The motor in this gen R1 is bulletproof.
 

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #8
Excellent bike, excellent mods (all the right ones), especially the stacks, suspension, and wheels. I wouldn't take a penny less than advertised price as it's worth every dime. That's a turnkey completely modded bike with very expensive parts. Bike + his parts (My bike is extremely similar) is well over 20k. 13k is a steal, especially given current new bike prices. The motor in this gen R1 is bulletproof.
Thanks brother! Not looking to get rich with the sale by any means, just want to get what I feel is a fair price. :thumbup
 

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #9
Original post updated with much better pics, thanks for the recommendation Kevap!! :thumbup :beer
 

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #10
Friendly bump for a great bike! :thumbup


Sent from my iPhone using Tapatalk Pro
 

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #12
Is there any chance you will be in Indiana anytime soon.....with the bike? LOL

Amazing build and very fair price. I really wish you were closer
Lol Sadly, no chance of that my man. Thanks for the kind words, I appreciate it!


Sent from my iPad using Tapatalk Pro
 

·
Klaus Von Slowpoke
Joined
·
5,819 Posts
Florida plates? Do you have clean title? What weight is the suspension sprung for? Do you have the stock parts?
Thanks.
 

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #15
Florida plates? Do you have clean title? What weight is the suspension sprung for? Do you have the stock parts?
Thanks.
Yep, it’s currently registered in Florida. I’m in the USAF and decided to leave it registered there when I arrived in California because....well, California can suck it with their prices and whatnot. Bike has never been down or in an accident, so it’s good to go with a clean title.

I can’t remember for sure, but I thought I had it sprung for right at 200.

And no, I don’t have the stock parts. Sold them to recoup some of the money I spent on the mods.

:thumbup


Sent from my iPad using Tapatalk Pro
 

·
kickin' at the darkness
Joined
·
10,165 Posts
wow, this is one very nice build.. sorry to see you're letting her go.

if i didnt have my 09 already, i would consider this beauty.. specially since you're down in Cali!

@iamzombie

i hear yah on the dollar exchange.. its eating us alive these days, considering it was at par not long ago.
 

·
Love that Crossplane...
Joined
·
1,396 Posts
Discussion Starter #18
HOW HAS THIS NOT SOLD YET???

Seriously, that deserved caps...
lol, guess it’s just not meant to be. That’s alright though, I don’t mind hanging onto it if nobody wants it. Was a lot of time and love that went into building it.

wow, this is one very nice build.. sorry to see you're letting her go.

if i didnt have my 09 already, i would consider this beauty.. specially since you're down in Cali!

@iamzombie

i hear yah on the dollar exchange.. its eating us alive these days, considering it was at par not long ago.
Thanks brother, I appreciate the kind words.




Sent from my iPhone using Tapatalk Pro
 

·
kickin' at the darkness
Joined
·
10,165 Posts
HOW HAS THIS NOT SOLD YET???

Seriously, that deserved caps...
I was going to post this myself..

mind you, i would have gone with BOLD for shits n' giggles ;)
 
1 - 19 of 19 Posts
Top