Yamaha R1 Forum: YZF-R1 Forums banner
Status
Not open for further replies.
1 - 6 of 6 Posts

· Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
Hey everyone I'm new to this forum. This is my first bike that I've owned. The person that had it prior did a fender eliminater kit and put a integrated tail light in. When the tail light was installed the turn signals wasn't hooked up. I'm not sure where to begin to look to find the stock wires to hook it all up. I don't want to just start taking stuff apart and end up messing something up. Can anyone give me some advice on what I need to do to hook them up?


Sent from Motorcycle.com Free App
 

· Registered
Joined
·
4 Posts
What year bike is it? And if you could post a pic of the current wiring situation that might help. I'm new here too, I might be able to help you. I wired up my own integrated tail light using 3 relays. It wasn't hard, and cost me about $15 if you have a basic set of wire strippers/crimpers
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top