[ples34]

I think I have the stock relay located. It has the brown and brown striped wire coming out of it if I'm correct. According to the directions, I need the black wire coming from each of my signals. Where are these? Do I need to cut all the tape off to fing these wires? And where do I cut these wires. Please help.:cryin

 

[ples34]

Can anyone help? I know some of you have done this.:dunno

 

[bluer101]

The Libertek Relay goes in place of the stock relay. :fact You do not need to cut any wire except for the 2 wires comming out of the stock relay.:thumbup Then another wire goes to ground. A total of 3 wires to hook up.

 

[Eyespy]

I think I have the stock relay located. It has the brown and brown striped wire coming out of it if I'm correct. According to the directions, I need the black wire coming from each of my signals. Where are these? Do I need to cut all the tape off to fing these wires? And where do I cut these wires. Please help.:cryin

The black wire at each signal is a ground wire. blue r101 is correct. You only have to ground out the black wire from the Libertek, and it is then electrically "connected" to all the signal black wires automatically.