Yamaha R1 Forum: YZF-R1 Forums banner
1 - 4 of 4 Posts

·
YoU CaN Do iT!!!
Joined
·
44 Posts
Discussion Starter · #1 ·
Ok I have started on this project last night I have bought some headlights from a 2006 CIVIC it came with angle eyes and hid ect for like $30... but I really was just going for just prjectors.. I have measure the size and such t looks like it would fit. I cut the civic head lights from the back with a drum tool and took out the projectors. Then I have made the mark with what shape the proj with a piece of paper.. I started to disaccemble my r1 fairings to take out the headlight. I used a heat gun or you can use a blow dryer to heat up the r1 headlights to take it apart it take time and plying out the plastics. Be careful!! You have to take out the chrome inner piece out and mark it with the paper that you used on the projs then slowly cut it with the drum tool of the shape. I haven't finish yet but I gotten one side done so far. I wiill post some step by step pictures tonight.

Here are the lights I bought



<a href="http://photobucket.com" target="_blank"><img src="http://i152.photobucket.com/albums/s198/mpham012/IMAGE_012.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top