Yamaha R1 Forum: YZF-R1 Forums banner
1 - 2 of 2 Posts

·
...
Joined
·
585 Posts
You can only use the fine tune adjustment with those adjusters. 04-06 shocks use hydraulic, the one in the pic above looks like a worm gear setup. Traxxion makes a collar that replaces the adjuster to give you a wider adjustment range. The fine tuners give only around 10mm or so. Taking the adjuster off requires a heavy duty spring compressor to remove the spring. I welded up a setup that worked ok. Once you install Traxxions manual adjuster changing spring rates in the future is much easier.

PS - you can still use the stock Ohlins setup but you need to remove the spring everytime to slide the hydraulic adjuster away from the locating pin.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top