Yamaha R1 Forum: YZF-R1 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi guys.
Trying find a fix for a problem with firing at the wrong time. Cam sensor and crank sensor are not corresponding with each other and is firing while intake valves stil open. Trying to find out the air gap for both sensors especially the cam sensor because its had modified cams with a modified pick up. Car rang before with old motor. Put new motor in with same cams and sensors and issue started. Cams are in correctly and haltech computer is no issue either. Haltech themselve said maybe air gap is wrong which could fire at wrong time. R1 2002.
Thanks for any help on information
IMG_20190909_181213.jpg
 
1 - 2 of 2 Posts
Top