Yamaha R1 Forum: YZF-R1 Forums banner

tick tick tick...F*CK THIS THING!

3871 Views 32 Replies 28 Participants Last post by  luv2ride
alright, ive had it, im fed up i can take it no longer. this ticking is driving me up a damn wall...and why? because this 10000 dollar bike sounds like a piece of shit. people at the light look at me funny. now i KNOW what all yall are going to say..so please contain yourselves. im about to make a point.

*note* do yall's bikes tick at idle, or all the time? mine gets a lil louder with rpm, seems to be the ugliest at 4-6000 rpm, i guess after that my pipe hides the sound.

i build race motors for a living, i have heard every god awful valvetrain out there. this is not a happy sound the bike is making, but it is definately a valve train noise. it has gotten louder in the past 400 miles {3500 now, 3100 when i bought it} has anyone ever really figured out why they tick? this so called "follower" is the bucket the sits on top of the valve lash adjusting shim. where the f*ck is tapping against to make this noise. is the bucket sticking to the cam and being pulled off the shim then slammed back down? is it the wrong size for the hole it is in? excessive "skirt" clearence if you will. help me out here someone, anyone. no i wont ignore it, and you should NOT advise people to ignore this sound. not everyone can tell the diff between motor noises. anyhow back to my pos....
anyhow this noise sounds suspicously like cam chain noise to me...do these things tend to break chain tensioners? do the chains need to be adjusted or is it automatic? any ideas here? PLEASE FOR GODS SAKE SOMEONE HELP ME! if it cant be fixed, im gonna sell it and get a busa...
1 - 1 of 33 Posts
tick tick tick

I have a 2001 cbr 600 that did this. All it was was the cam chain tensioner. I had this replaced and it stopped. This is a common problem on new cbrs. Good luck with your r1, hopefully I'll have mine this week!!:D
1 - 1 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top