Yamaha R1 Forum: YZF-R1 Forums banner
1 - 16 of 16 Posts

· shizzz kat
Joined
·
112 Posts
Discussion Starter · #4 ·
those were the holes from the fender that held the license plate and original signals. they were so big i had to make good use of them. i originally wanted to put the signals in the rear foot pegs.
like this.
 

· Faw Q, Pay me!
Joined
·
3,881 Posts
stud said:
those were the holes from the fender that held the license plate and original signals. they were so big i had to make good use of them. i originally wanted to put the signals in the rear foot pegs.
like this.

Good job!
 

· Beeeeeer!
Joined
·
9,543 Posts
:thumbup Looks good. You can still do the pegs, you can never have too many lights.

Also I would not run individual wires to each LED in the peg.


Are you going to make a lens for the front turn signals like the Euro model?
 

· SpidermanSS killer.
Joined
·
1,261 Posts
GXRKLR said:
:thumbup Looks good. You can still do the pegs, you can never have too many lights.

Also I would not run individual wires to each LED in the peg.


Are you going to make a lens for the front turn signals like the Euro model?
I'll even make it a little easier cause I thinnk they look so sweet!

http://www.muzzys.com/ZX10/ZX10EuroSig/
 

· shizzz kat
Joined
·
112 Posts
Discussion Starter · #11 ·
and for the plate i added a HID white LED

still gotta loose those red reflectors holding the plate on
 

· shizzz kat
Joined
·
112 Posts
Discussion Starter · #14 ·
ill take closer pics tonight and some from under the seat so you get a better idea.
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top