[05strippedr1]

I am hoping I get lucky and someone has some of the following peices. I am looking for the large rubber boots for the frame side of the intake tubes, the circular caps for the back of the headlights,the small running light bulb rubbers/ bulbs, passenger pegs and seat, kick stand switch, and the small left and right plastic pieces that join the upper and lower fairing and screw into the frame with 2 bolts each. Thanks

"edit" Also the center v behind the front tire that joins the lowers together and any dzus fasteners or clips please. Thanks again

 

[hkdupz]

I have pass pegs 60 shipped powdercoated flat black

 

[BSR-1]

I've got a side stand switch.
pm if interested.

 

[05strippedr1]

pm sent

 

[05strippedr1]

help

got the center v and 1 running light socket, still need everthing else.

 

[05strippedr1]

bump

 

[312R1]

I have the rubber ram air boots and the headlight bulb covers.

 

[05strippedr1]

pm sent

 

[05strippedr1]

payment sent 312R1, Thanks

So far forum members have hooked me up with the center v, intake tubes, 1 rubber running light socket, rubber intake boots,and headlight caps. thanks guys!!!



Its down to 1 small running light bulb rubber/ bulb, passenger pegs and seat, kick stand switch, and the small left and right plastic pieces that join the upper and lower fairing and screw into the frame with 2 bolts each and fasteners.

Thanks again

 

[05strippedr1]

@update@


I shot my first coat of primer today and looks great. Still need the pieces listed above but i'm going to get her as ready as I can until I get them. H.O.K. Pearl white, blacked out frame pieces, H.O.K. shimron with 4 gramrs micro silver flake is going to look good i'm hoping.

 

[RocketScott]

I think I have the kickstand switch out in my shed if you still need it.

 

[05strippedr1]

yes I do if you still have it.

 

[China J]

I have the Factory dzus fastners brand new still. Removed them when I purchased my bike and replaced with the racing style dzus

 

[yokedup05]

rear pegs and seat MINT-$75 shipped

 

[05strippedr1]

pm sent to china J, thanks for the support yokedup but I'm looking to go a little cheaper, I'm on a tight budget.

As far as everything else Its down to passenger pegs and seat, kick stand switch, and the small left and right plastic pieces that join the upper and lower fairing and screw into the frame with 2 bolts each and fasteners and the trim under the intake tubes. Thanks for all the help guys

 

[BSR-1]

, and the small left and right plastic pieces that join the upper and lower fairing and screw into the frame with 2 bolts each and fasteners

these actually use 3 bolts. I have one (don't remember which side) that is slightly damaged if you are interested.

 

[05strippedr1]

pm sent, anyone else wana add a couple bucks to thier paypal acount?

 

[WHITE-1]

I have a running light bulb & boot if you still need.

 

[BSR-1]

mid connector.

crack is small line above screw hole in pic, long squiggly line to the left of it is just the light on the edge & is not a scratch.

 

[05strippedr1]

white-1 Juust got the oter one I needed in the mail, thanks

BSR-1 Thats what i'm looking for, Pmed you