[CaLi-RiDr]

What's up guys.
So my issue right now is,
the clutch not engaging.
i was removing some bolts from around the clutch cover to paint them, one at a time. I removed and replaced the following bolts.

Anyway now the clutch isn't Engaging, while the engine is off: i put the bike in gear pull the clutch and i cant roll it.

I checked the arrow and the dot on the cover and they are aligned.
I also gave the clutch cable more slack.
I really don't know if i did it the correct way.

Any help is appreciated.

Sent from my LG-LS970 using Motorcycle.com Free App

 

[Reflections]

You have to pull the cover back off , the pin inside has notches on it and need to be turned to the left to lign up again

 

[CaLi-RiDr]

Thanks for the help.
Which cover are you referring to? The small one or big one?
I never removed the big cover. Only single bolts at a time.
Now the small plate i removed all the way.

Sent from my LG-LS970 using Motorcycle.com Free App

 

[CaLi-RiDr]

Ok so just a follow up. I adjusted. My clutch cable at the lever, didn't help, adjusted the cable at the lock screw on the engine side. Didn't seem to work.
did some research and read somewhere, That cold oil may be the issue.
A few weeks ago, I Posted that my local Yamaha gave me the wrong oil. Too thick!!
The Weather has been changing here recently.
So i let my bike warm up to 150° and it worked perfectly. Now i will be changing my oil to the correct specifications.
Thanks for the help.
Sent from my LG-LS970 using Motorcycle.com Free App

 

[r1hotrod]

Do you have pressure at the clutch lever? Does it feel the same as it used to?


Sent from my Motorcycle iPhone app

 

[CaLi-RiDr]

Since i made some changes to the cable the lever felt a little sensitive, but with sone minor adjustments. I got it back to normal.

Sent from my LG-LS970 using Motorcycle.com Free App

 

[turbobuickbro]

Not being a dick at all but what you are describing is a clutch that wont "disengage"

 

[CaLi-RiDr]

yeap

Not being a dick at all but what you are describing is a clutch that wont "disengage"

you are correct sir, i did f up. i meant disengage.