is there a fuse or a disconnect up front? thanks!
how to disconnect headlights for trackday?
mdallasm
1 - 7 of 7 Posts
Joined
·
3,011 Posts
Yes but its way down by the lights. Its easier to remove them. Remove the side fairings and the screws for the lights are exposed. 3 on the clutch lever side and 2 on the throttle side. And they fall out. Snip the zip tie for the damper and pull off the fuse box. In that box is the fuses for the lights. I took mine off. Those things are $680 is the cheapest ive seen.
You can just disconnect the controller. It is on the LHS under the fairing where all the connectors are located.
Its quicker than taking the lights out.
Joined
·
3,011 Posts
take them off the bike. they actually weight a significant amount too.
Joined
·
127 Posts
Some organizations simply allow you to tape over them. Blue painters tape comes right off. Good luck at your track day!
Joined
·
31 Posts
Easiest like shifu said would be just unplug them from light control unit you'll find under a left side fairing, you'll see two plugs, bottom for headlights and top for turns and such. Another way would be to unplug them, you might have to remove those plastic covers that you see on both sides next to cluster, you can see the wires that run to left side of the headlight, I clicked it and installed a switch in that plastic cover to shut it off and just leave the led strips on during the day.
1 - 7 of 7 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
