Yamaha R1 Forum: YZF-R1 Forums banner

2008 R1 Ignition won't turn?

375 views 2 replies 3 participants last post by  SeonTheNeon  
#1 ·
Ok so I'm looking to buy a second hand 2008 R1 with +-50k on the clock. The bike was parked at the back of the dealership as the battery was on charge. When I first started the bike it worked perfectly, then I moved the bike out and tried to start it again but the ignition wouldn't turn at all. This leads me to my first question, does the battery have anything to do with the ignition not wanting to turn( also important to note there are 2 keys one original coded key and one that the dealership cut, neither of which would turn the ignition). My second question being if the transmission is broken and needs to be replaced does the gearbox need to be replaced too?( I was told this could be a possibility by employees at a Yamaha dealership)
 
#2 ·
The battery state will not stop the ignition lock from turning, Are you talking about the gearbox and transmission (clutch?) if the clutch is bad no you just replace the clutch, if the gearbox is bad, stay away because I doubt you will be able to find a used one for cheap let alone find one at all. It took me 5 years to find one cheaper than buying a smashed bike haha. Only the 07 and 08 models share those parts. Good luck