Take a pic of the underside of your clutch lever where it attaches to perch


Sent from my iPhone using Tapatalk Pro

 

 

Is it turned off in the dash?

 

No it’s turned on.

 

Check engine light?

 

A couple things kill the QSS.
Check engine light
Bad sensor
Clutch lever isn’t pressing plunger button in
Revs too low
Bad ground
its turned off.
Your problem is one of those, Eliminate them and report back

 

It was the clutch switch. Bypassed it and seems like it will work fine now. Have one on order. But for now I just have it bypassed.

 

Just took it for a spin. I got it to autoblip once or twice from 2nd to 1st but nothing else. No quick shifter. This is annoying.

 

You shouldn’t have to bypass the switch as long as the lever is pressing the button in

 

The clutch switch is bad. Went to remove it and broke a bolt in the perch so had to bypass it for now. But it’s still not fully working. I’m clueless. Where does it plug into ?

 

I also switched it to gp shift. Is it directional specific?

 

If you flipped the knuckle that won’t work. You’ve got to re-tap the shift lever. The bike thinks you’re trying to upshift downshift backwards.

 

I know when I got my ECU flashed the green up and down arrows dont light up anymore. Totally normal I thought it was broke at first then I was watching a 650ib and he mentioned the same thing after his was flashed.