here is the slice from my 01 seat.

 

Nice how to and something i'm gonna do when i find some foam to add on the front.What did you do glue the quarter inch on the front?

 

Nice how to and something i'm gonna do when i find some foam to add on the front.What did you do glue the quarter inch on the front?

you can just tape it as it is held in place by the stock foam and cover. You can use a gel insert from travelcade or old mouse pad or anything in between. I rode 400mi. in a day to San Fran and Sac. on the both bikes with no butt burn of wrist problems. Seat still looks stock too.

 

awsome im gonna do this to my seat, DAMN that thing is so bad. on your 05 where exactly did you add more padding after you cut that hunk of foam off? could you use a picture if u got it for an example?

 

is this cheesy or what?

 

Dumb question, but why didn't you just use the foam chunk that you cut off and move it forward on the seat instead of using another piece of foam?

 

i'm sure my ass will be thanking you.:lol :thumbup

 

Dumb question, but why didn't you just use the foam chunk that you cut off and move it forward on the seat instead of using another piece of foam?

it was not level , it is angled like a pyramid and is not wide enough to wrap around the sides. The stock foam is pretty thin in a couple of spots causing pressure points.. This mod really works.

 

i'm sure my ass will be thanking you.:lol :thumbup

that just does not sound right.

 

Re: make any R1 seat more comfortable

I have done this to both my 01 and my 05 and it works. The stock seats have too much slope and throw your wieght forward to your wrists not to mention the parts that are plastered to the tank.
remove seat
remove staples that hold cover on, leave staples at back though.
pull cover back and remove foam.
using hack saw blade or bread knife cut foam protrusion that goes into seat off as seen in pic.
I also put a 1/4" foam piece under the front 3-4 inches of stock foam pad to level it a little more.
put foam and cover on and secure with 1/4 or 3/8" staples.
Seat will appear stock but will level out and sink into pan becoming slightly concave which matches your a$$ better.

Ldhr1~ you the man,thx to you i now have a seat instead of a wedgy.I would never have done this without your informative "how to". Thank you from the bottom of my seat.

P.S. Keep 'em comming........

 

Pipes!
Seats!
Wedgie free huh?
Awesome you the man

 

:lol

 

Excellent!!

You should send this mod to Yamaha! Of course that could cut into aftermarket sales/

 

how does this affect hanging off when riding hard?

denward

 

how does this affect hanging off when riding hard?

denward

It does'nt , you are not sitting in a bowl like a corbin so you are not locked into place.

 

got any ideas on the passenger seat?

not that i sit on it, but i get complaints all the time about how bad it is.

 

Time to get rid of her.:fact










J/K my wife does nothing but complain.:secret:

 

got any ideas on the passenger seat?

not that i sit on it, but i get complaints all the time about how bad it is.

I just got an extra from a member here and I will post my results. I put a gel insert on my 01 rear seat and it worked great but the 04-05 will need more than that.

 

got any ideas on the passenger seat?

not that i sit on it, but i get complaints all the time about how bad it is.

You mean you actually have gotten someone to sit back there.
I don't think i will ever need a passenger seat...

 

yeah, my gf gets on the back, but after going to superbikes adn back (2 hours roughly each way, she swore never to get on again for more than about 30 mins. would be nice to go touring on it, but its not feasable now. though i do prefer to go alone, its also nice to get your laydee on the back and take off for a day

 

front seat mod

Ummm well i've tried this mod on my 03 R1 and to be honest, after a week of tryin it out... i have'nt really felt an improvement !!

can't understand it as you guys seem to have noticed a real big difference ????

 

front seat mod

Ummm well i've tried this mod on my 03 R1 and to be honest, after a week of tryin it out... i have'nt really felt an improvement !!

can't understand it as you guys seem to have noticed a real big difference ????

 

Re: front seat mod

Ummm well i've tried this mod on my 03 R1 and to be honest, after a week of tryin it out... i have'nt really felt an improvement !!

can't understand it as you guys seem to have noticed a real big difference ????

I did both my 01 and 05 and felt it was a big improvement. I am not familiular with the 02-03 seats but my seat were a lot less angled after doing the cut and adding some foam to the front 1/3. There is definitely less weight on my wrists and less pressure on the center of my a$$. If it is worse for you you could always put the slice of foam back in.

 

I sent mine off to Sargent for a rework. I couldn't be happier with the results! Those guys do great work! I'd post picks but the files are too big.

KK

 

03 seat

hi LDHR1

not knocking ya idea mate .. just wondering why i have'nt noticed any improvement... has anyone else done this mod to an 03 seat ?????

I have a buddie here in the Uk who has an american spec bike and the seat appears the same as mine ... perhaps its me butt ??

 

hi LDHR1

not knocking ya idea mate .. just wondering why i have'nt noticed any improvement... has anyone else done this mod to an 03 seat ?????

I have a buddie here in the Uk who has an american spec bike and the seat appears the same as mine ... perhaps its me butt ??

ive done it to mine ,but maybe living in the uk u wont feel it as we never get to ride our bikes due to the weather.lol

 

LOL,I have an 04 and when you sat on it it didn't (sag,give,flex)it was hard as hell anyway and sloped toward the tank.
Now after doing the ldhr1 mod, my buttocks nestles down onto a softer feeling seat that doesn't slop nearly as bad..
thanks les :fact

 

ya i bought a corbin and I'll tell you it was a waste of $250 and when it come in they had made the brackets backwards AND slightly off on the holes...

Hide