do you have any pics of the grips.
i have never seen them, and i can't find them on the wed. just want to see how they look

 

hey all,

here's the grips along with the rear sets they have. i liked these because the throttle side does not need that weird tube, since they are billet. they are great for the price, about $52 plus shipping. also offered in different colors, and optional bar ends.

jerry

 

hey all,

here's the grips along with the rear sets they have. i liked these because the throttle side does not need that weird tube, since they are billet. they are great for the price, about $52 plus shipping. also offered in different colors, and optional bar ends.

jerry

:secret:hey, there is :no pics:dunno

 

Hey All,

Sorry about that.. here is a picture of the grips, the are billet aluminum and a very grippy rubber section.

http://www.pjsparts.com/catalog/product_info.php?manufacturers_id=12&products_id=84

The rear sets are here, they are super nice and the fit is superb. I had them on my old bike, and need to save up more to get them on the R1.

http://www.pjsparts.com/catalog/product_info.php?cPath=24_125_43&products_id=126

Jerry

 

nice, i like the grips:rock
the rearsets are hot also

 

here are the RIZOMA grips and conical bar ends on my cousin's 07 R1

 

those look pretty sweet
how soft is the rubber?

 

rubber is very soft and comfortable.

softer than stock grips and definitely softer than the renthal hards that i have on my bike.

 

The grips are great! They took less than 10 minutes to install. The feel is awesome.

 

Got a link to more pics of your bike?

 

They replace the entire throttle tube on your right bar.

Open the right side switchgear and disconnect your throttle cables. You might have to loosen the cables to do this. Remove the stock grip and the plastic sleeve it mounts on.

Select the adapter that came with the grips that most closely matches your stock attachment, and install the cables on it, then slide the billet throttle grip up the right handlebar and snap the adapter and grip together and re-adjust the cable slack and reassemble your switch housing.

On the left side it's just two setscrews.

 

Italian Lover

Thanks for posting. I just discovered Rizoma about 3 days ago and plan on getting almost all of my accessories through them. Including my rearset.

Beautiful, functional and unique.

 

nice

 

How do you guys open a 3 year old thread?? I'd get my R's kicked for doin' that!
NIce pics by the way LOL

 

Got the rizoma's aswell... They went straight off.. They where killing my hands.. not comfy..

 

Im still waiting on a writeup on how to install these on a 01R1. @ NSDQ how did you get your mirrors to work like that? im jealous!

 

Im still waiting on a writeup on how to install these on a 01R1. @ NSDQ how did you get your mirrors to work like that? im jealous!

The mirrors I have are called "Dynamic" and they were made for the 04 so there were no issues, they just bolted right on.

 

Rizoma Red Grips

Here's my 05 with Red Rizoma Grips with the Brake resevoir and Blinkers. Also there's Woodcraft case slider. On order are the Rizoma Bar extentions, mirrors and rearsets with the rear brake resevoir, can't wait.

The grips are uncomforable compared to the factory but do look better. They are easy to put on. They are difinely high quality produced which gave me confidence to go for it with the extra parts. I plan on more but the cost stings a little at least till I get them on.

How to:
Just remove the old Throtte grip and exchange the geared ring to fit, re-attach the cables and put back together. Make sure the pin lines up with the hole on the bar for placement. On the clutch side, twist off the old grip with pliers or cut off then apply silicone on the bar and inside the grip and slide on. You can clean of any extra silicone with denatured alcohol. Try to keep it from going down the inside of the grip, it will weaken the silicone. Tighten the screws on the grip and let dry overnight.


I'll add the pics after I get the new parts.