PCIII, speedo healer, Acumen Gear indicator, frame sliders.

 

Function

Ohlins Steering Damper
Sato Rearsets /w GP Shift
DynoJet PC III /w Dan Kyle Map
K&N Air Filter
Gutted Cat
EXUP Removed
Graves Velocity Stacks
Graves Smog Plates
Pazzo Clutch Lever (Black)
Galfer Stainless Brake Lines
Braking Wave Rotors
Brembo 19x18 Master Cylinder
EBC HH Pads
Lightened Rear Rotor
RK GXW 520 Chain -1, +2 (Stealth Sprocket)
Speedohealer
Intuitive Frame/Clutch/Swingarm Sliders
Michelin Pilot Power 2ct 120/70 & 190/55
Extra set of rims with 120/70 & 190/55 Pirelli Superbike Slicks

Form

Graves Fender Eliminator
Graves LED turn signals
Hotbodies Flushmounts
Zero Gravity Double Bubble Windscreen
Slim Ballast HID Kit /w 5000K Bulbs
PIAA High Beam Bulbs
Raven Mid Fairings
Carbon Fiber Ram Air Ducts
Carbon Fiber Rear Hugger
Carbon Fiber Chain Guard
Carbon Fiber Swing Arm Guard
Yamaha Solo Seat Cowl
Decals removed


Gear

Arai RX7 Corsair Gloss Black /w Smoked Visor
Shoei X11 Kiyonari TC-5 /w Smoked Visor
Dainese Zen Pelle Black Leather Jacket
Dainese Safety Pro Black Leather Suit
AlpineStars SMX Silver/White/Black Leather Suit
AlpineStars GP Plus Black Gloves
AlpineStars GP Tech Black Gloves
Sidi Vertebrae II Air Boots
Dainese BAP Back Protector
Arctiva Windblock Balaclava

 

how's the -1, +2 stealth? too much torque or just enough for city riding? Definitely getting some sliders! got to get it on before I ride. after changing the sprockets, I will get the healer.

 

i actually went -1 and +3 and i love it.....it made street riding and canyon riding so much more fun. I do not go to the track though so i really did not need all the high speed

 

also what is the best steering damper for this model bike?

 

well this is my 3rd 1000cc bike... and 6th bike over all.. might be too much for some to handle but its good for me. i enjoy the torque and quickness. ohlins, scotts, matris, gpr all make good dampers.

 

The functional bits on my bike are:

AP Racing dual bore master cylinder
Hel titanium lines
Brake-Tech ductile iron rotors
Ferodo CP 2.11 pads
Castrol SRF fluid
STM slipper clutch
Graves full exhaust
PC III
Ohlins 25mm cartridge kit
Graves Ohlins shock
DID ERV chain -1f, +2r
R&G frame sliders
06 Swingarm
Remote alarm system

 

Thanks immortal. I had +2 on the rear of my 02 and i loved it. I'll try out the -1 first and see how that goes, then if I need more torque i'll change the rear to +2. you got a lot of mods on your bike. Wish I had the money to do all that. I will add as much as my money will allow. Nice bike!

 

congrats on the bike

 

Full Akrapovic Carbon Race System
Ohlins Shock w/ Graves Spec Valving
Galfer Wave Rotors
Dyno Jet Wide Band Commander
Vortex Rearsets
Ohlins Damper
Dyno Jet Ignition Module
Dyno Jet PC3usb
Dyno Jet Quick Shifter
Brembo Billet MC
Red Racing Carbon Frame Guards
Red Racing Carbon Swingarm Guards
Red Racing Carbon Airbox Cover
Red Racing Carbon Front Fender
Red Racing Carbon Rear Fender
Gilles Chain Adjusters
Factory Pro Stacks
Custom LED Tail-Light
Second Look Tank Bra
Tape Works Graphics
Pazzo Shortys Levers
Full Delrin Sliders
Greggs Flushmounts
Rear Solo Cowl
Greggs Sprocket Cover
MCarbon Tank Sides
Speedo Healer
BMC Air Filter
Vortex Gas Cap
CRG Billet Bar End Mirror
Zero Gravity Dark Smoke Screen
Greggs Customs Mirror Covers
Graves Bar Ends w/ Add On
Cox Radiator Guard
Air Intake Grills
Graves Smog Block Offs

 

A second set of beat up plastic for track days. The best mod you can get for your bike. :thumbup

 

in my sig

 

On my '04:

Performance

1) Ti-Force Slip On Exhaust (including Y-Pipe)
2) PCIII USB (Ti-Force Custom Map)
3) Ohlins Steering Damper
4) Galfer Stainless Steel Brake Lines (front/rear)
5) Galfer Brake Pads (front/rear)
6) Michelin Pilot Powers

Cosmetic

1) Zero Gravity Dark Smoke Wind Screen
2) Graves Fender Eliminator
3) Graves Frame Sliders
4) Intuitive Swing Arm Sliders/Spools
5) Greggs Flush Mounts
6) CustomLED Tail Integrator
7) CustomLED Marker Lights
8) CustomLED Tag Light
9) Libertek Turn Signal Relay
10) OEM Yamaha Seat Cowl
11) Magical Racing Carbon Fiber Mirrors
12) Pazzo Racing Brake/Clutch GP Levers
13) Kyle Racing Preload Adjusters
14) Cox Radiator Grill
15) Pro-Grip Carbon Fiber Tank Pad
16) Harris Performance Grips
17) Lockhart Phillips License Plate Holder
18) Swirl-B Billet Bar Ends
19) Second Look Seat Skins
20) Patrick Racing Polished Master Cylinder Reservoir Cap
21) CTS Moto Front Sprocket Cover
22) Yamaha Lettering/Logo Rim Decal
23) DZUS Fasteners (Aerotek)
24) Carbon Works Carbon Fiber Mid Fairing Connector
25) GYT-R Billet Aluminum Oil Cap
26) GYT-R Carbon Fiber Front Fender
27) GYT-R Carbon Fiber Heel Guards
28) GYT-R Carbon Fiber Rear Hugger/Chain Guard
29) GYT-R Carbon Fiber Clutch Guard
30) GYT-R Carbon Fiber Side Panels
31) GYT-R Carbon Fiber Yoke
32) GYT-R Carbon Fiber Headlight/Ram Air Accent Set
33) GYT-R Carbon Fiber Fuel Cap Cover

 

Fender eliminator, Gut the cat, PCIII, gutted the stock can's and repacked the mufflers, sliders. Love the bike!!! You are going to love that bad boy!

 

Thanks guys. I'm thinking of getting a different bike for the track, maybe an older model. how hard is it to gut the cat and also how much time should I be allocating to do it? I heard it's great for the heat problem.

 

Takes about ten minutes. I gutted mine with a drill and 1 1/2 inch wood drill bit. Came out really easy. An hour and a half to take the pipe off, gut it, and put it back on. Nice bike. Good luck with it.

 

I just have Termignoni slip ons, frame and swing sliders, Puig db windscreen, and a 180 rear tire for better and quicker turns.

 

I'm +3. I've had it like that for a least 10k miles and it works well. I'd go for an upgraded steering damper.

 

Nice bike!

:thumbup

 

quick question for you!

how much experience do you have? (I mean on bikes, not kissing) :makeout

welcome!

 

On my 05' track bike:

06 Swingarm with carbon protection.
07 lower and top triple.
Front discs rebuild so they are full floating.
520 chain, front 15, 16 rear 42, 44, 46, 48.
A&R baffles.
Gutted cat.
Bazzaz Performance quickshifter.
DIY GP shift thingy.
CBR1000RR radiator.
Removed thermostat.
Martis M05-R shock with hyperpro progressive spring
Modified valves in fork and modified shim stack on midvalve and rebound stack.
Hyperpro progressive springs in the forks.
DIY quick gas.
Carbon airram intakes.
R&G frame sliders, front and back.

 

Graves ti slip on w/ cat eliminator
PCIII USB
Graves Smog block offs
Graves Stainless bar ends
Graves Frame sliders
BMC air filter
Pirelli Diablo Rosso tires
Galfer Stainless Brake Lines
Integrated tail light
Puig Double bubble blue windscreen
Carbon Fiber clutch guard.

+1 To the purchase bro!! Definitely the best looking model!!:rock

 

I went -1,+1 and think it is a nice balance. The rest of the mods are in my sig plus too many more too list. This will be my last sportbike, so I am going all out. I figure in about 5 years or so it will be time to slow down and get a sport cruiser.

 

GTYR slipons
Gutted and Ceramic coated cat
Graves V-Stacks
PCIII USB ( somewhat custom map)
Galfer Steel brake lines
Galfer Wave Rotors ( on the way )
Pazzo levers
Puig DB Black screen
Heavy bar ends
Frame Sliders
Metzler M3 tires
-1 front sprocket
speedohealer
Slyvania SuperStar H7 bulbs
Clear Alternatives Blue integrated taillight
Corbin Seat

 

Flemming J P, I've been riding for about 3 years now. 2nd on a R1. Do mostly city, backroads, and twisties on the mountains. Trying to save some $ to hit the tracks. All my buddies are going up in July so I think I'm going to go with them. Starting to save right now.:thumbup