Cool to the touch... really :lol

 

probably depends on the bike and exhaust manufacturer a bit, but it can happen. my old roomate's 636 had a titanium can, and it was true: even after riding in Miami heat, you could touch it with a bare hand immediately after stopping.

as for the underseat exhaust, wrapping the pipes will probably help with the heat around the legs and butt.

 

The titanium system on my Gixxer is hot as ****, even after being shut off for ten/fifteen minutes, so I don't think it's going to be much cooler.

 

really. I had a Ti slip-on on my old R6 and after a full day of riding, with the bike still on I was able to touch the can with my hand. It was warm, but not hot.

 

Slip-on, PcIII and Y-pipe will allow your bike to run a few degrees cooler....and less heat on your legs...but don't expect a cool bike afterwards

 

I've got the Ti-Force full system on mine & I do notice that the pipes cool off pretty quick after shutting her down. As far as while riding, I don't notice too much of a difference over the stock system..but it seems better. The sometimes bothersome heat isn't from the system though...it's the frame/engine on the right side.

 

Yeah, I do run cooler temps over stock also. Usually 163 degrees or so unless in traffic.

 

I had a ti exhaust that came on my 954... Never was cool to the touch for me.

Regardless might be different on different fitments of exhaust. :thumbup

 

OEM Ti exhaust = THICK !!!

Aftermarket Ti =Thin

My Full Ti Arata on my 02 was never very hot while running....and cooled quite quickly. The OEM Ti can got Hot


Thicker metals can get hotter and hold heat longer :thumbup

 

thanks guys for all you help. but now im back at square 1