I cut the ground wire on the corner markers and ran a jumper from the bulb to the + of my flushies, now they blink.

 

You didn't cut the ground, you cut the power-source. If you cut/connected it to the ground, it would short the fuses to both the signals & markers...

:vanish

 

no does the marker light still on when its not flashing or is it just a directional?

 

The way that was described above will only convert them to directionals, however if you search for "Running light mod" you will find various other methods of doing this. Here's one of them

http://www.r1-forum.com/forums/showthread.php?t=232734&highlight=running+light+mod

 

What size is the replacement bulbs for the side markers in the headlight ? and where can I purchase some nice white ones ?

 

Nice threadjack :hammer::hammer:

They are 194 bulbs, here's some

http://autolumination.com/194.htm

http://www.superbrightleds.com/mini-wedge.html

 

Thanks ! Your help really highly appreciated.

 

No problem man :thumbup

 

now my rear directionals stay on as running lights. im going to try the relay method maybe this will work better they way above draws way to much power the front markers are dull as hell now