Yamaha R1 Forum: YZF-R1 Forums banner
1 - 20 of 20 Posts

draymond33

· is laid back...
Joined
·
22 Posts
Discussion starter · #1 ·
I was wondering if anyone has used a cooling mod? I searched and found one on ebay, I really don't like my bike running up to 120deg before the fan kicks on, I live in Houston, tx where it's freaking 80 when u wake up and 110 around 3!
 
I know you meant 220, it's actually 224 I think but anyway there are many people on here that have. Do a search for "fan switch mod" in the "Appearance and Mods" section. Plenty of info and "how-to" there and you can do it without having to buy the ebay kit.
 
get a switch remove left side fairing. find a white connector near the radiator. use T connector and connect an extra wire into green/yellow wire run to switch. run another wire to a ground (i use the one behind the gauge cluster) and your set. sounds iffy cause your tapping into an important wire. but its not that hard. plus run a search and theres a thread that goes into more detail
 
Discussion starter · #7 ·
get a switch remove left side fairing. find a white connector near the radiator. use T connector and connect an extra wire into green/yellow wire run to switch. run another wire to a ground (i use the one behind the gauge cluster) and your set. sounds iffy cause your tapping into an important wire. but its not that hard. plus run a search and theres a thread that goes into more detail
is this the same for 2001?
 
im running water with hyper lube super coolant, and the fan switch, my bike run at 163 while riding around town at 80-90F, at stop the bike goes up to 170-175. before it was running high.
 
Discussion starter · #15 ·
I only have one plug going into the radiator, i tapped into one wire there, and the wire going to the fan , going to a 2 pole 15a. switch, grounded, it comes on and off, and temp gauge is reading really high even though its cold.
 
1 - 20 of 20 Posts