I like it. Wish the R1 stood out a little more but the paint is sweet. I like seeing lists other than every bolt on performance part available. I would like to see one with Cadillacs new paint, black diamond. Working for cadillac, I hope to get a deal on some for my bike.

 

i'm actually thinking about losing this R1 logo. I thought it was nice when I first found it online but once on the bike i'm less than pleased with it.

heres a better pic of it

 

Bike looks great Mike! You didn't put the reflash down on your mods!

 

I knew I was forgetting something haha thanks man

My favorite paint scheme is the 07 charcoal grey and my favorite body style is the 09+ so this is like having the best of both worlds!!!

I agree with you with loosing the R1 logo and either leave it off or replace it with a carbon fiber or black one.

same here. I was going for the color of the 07 charcoal this is just a little lighter but it works good

I plan on getting a black R1 logo just havent set my mind on if i want it to have a border or something

 

My favorite paint scheme is the 07 charcoal grey and my favorite body style is the 09+ so this is like having the best of both worlds!!!

I agree with you with loosing the R1 logo and either leave it off or replace it with a carbon fiber or black one.

 

so how does that yoshi set up sound?? theres a full system on ebay thts a little beat up and im interested in it......
mainly cause its dirt cheeap

 

I think it sounds pretty damn good. Not deafeningly loud but still has a real nice rumble to it

 

sweet! im just tryin to get rid of my sidemounted system:shake

 

That color looks amazing on the 09! Really nice choice. I think a black R1 logo would suit it much better.

Class job. It looks like it belongs in a hangar next to an F18. :thumbup

 

Looks great man :thumbup

 

Alot better than yellow :fact

 

Awesome job:thumbup I agree with sab on the black R1 badge. Maybe like the '11s have?

 

Tdubb already told him. The 2011 badge is nice :fact

 

yeah i need to see what the measurements on that sticker is. the one i have on the bike now is a 5 inch decal and it just looks tiny on that huge fairing.

Looks great but I'm partial to silver & gray, is it two tone or is it just the lighting/shadows? Hard to tell in photos, but looks like mids are lighter gray than lowers.

good eye. the mids are a lighter shade. I used a light shade of primer on the mids. I wish I could say I planned that but honestly i ran out of the duplicolor primer and didnt want to spend $20 for another can just to do the mids. so I got a rattle can and used it. i couldnt match the shade of the primer i had so i went with a white knowing it would make the paint a little lighter. better lighter then darker or almost black. I think it worked out really well. kinda helps break up the color a little bit

 

Very smooth!

 

Nice

 

Looks good, Dig the Pilot Road 2's. I got them for the insane amount of highway miles. Great in the wet too!

 

Really sexy man :fact

 

Awesome job Mike!

 

That looks tough as fook man. Well done. :bow

 

Looks great but I'm partial to silver & gray, is it two tone or is it just the lighting/shadows? Hard to tell in photos, but looks like mids are lighter gray than lowers.

 

Looks great!

 

Bike looks great in gray, it might be the ONLY grey r1 around ( 09+ ) good job.

 

You spent all that money and nothing on suspension? Bike probably isn't even setup for your weight! All you need is some different springs, don't have to go all out.

 

Actually the suspension is setup. finally got to the track this past weekend and had it dialed in. the guy said with my weight and since i only ride street then the stock stuff will work just fine for me. now if i start running track days I may wanna change out the rear shock but said the fronts are fully capable with my weight (185)

 

ok i am going to give this the SIRJAG stamp of approval. well done.

 

Glad to hear its received a stamp of approval :rock:thumbup

 

i love it. i soooo miss the liquid silver of 03 04s.

 

That looks great, Mike! Was this rattle-canned?

 

I like it R1nStang!!! :flex:

thanks fella's no rattle can this time. I did it the right way and actually bought a paint gun and a can of paint. first time using a paint gun so it does have an imperfection here and there but unnoticable unless your leaned in and staring at the paint.

 

I like it R1nStang!!! :flex:

 

Looks great man!! Love the darker bottom fairings!! You should put the 2011 R1 badge on there and set it back like on the 2011, would set it off nicely!

 

I think thats the same logo Tdubb has on his. I was just trying to figure out how to place it since the fairing is f'n huge. looked at some pics on yamahsa website and I think the stock location would be best looking for it.