He cut the end off.

 

He cut the end off.

:iamwithst :beer :beer

 

He cut the end off.

and he didn't do a very good job of it :no

the logo should have been repositioned, looks way out of place that close to the link pipe, wrong end of the can :yesnod

 

Leo Vinci might make some mass production ones. A few guys on our racing circuit have them on their R6s.

 

akrapovic's EVO2 is shorter than their EVO by a couple inches, for that GP look :fact

 

akrapovic's EVO2 is shorter than their EVO by a couple inches, for that GP look :fact

Akrapovic's website makes no mention of this....:dunno :dunno

 

Akrapovic's website makes no mention of this....:dunno :dunno

yeah, they don't make it too blaitant on there....check out the 10R EVO page.

quoting from their site;
NOTE: We have also developed an Akrapovic EVOLUTION 2 exhaust system for the Kawasaki ZX 10R, which is intended only for races and championships which allow louder exhaust systems – 107 dB. The EVOLUTION 2 differs from the EVOLUTION 1 and RACING systems in the design of the muffler. The muffler is shorter and louder than the muffler for the EVOLUTION 1 and RACING systems. The Akrapovic carbon-fiber bracket is mandatory (instead of optional as for the RACING and EVOLUTION 1). The EVOLUTION 2 is only suitable for certain types of competition!

 

my short akro can :thumbup

 

he did not cut it....it's an evo2!!!!!!!!!!!

 

Graves makes shorty cans.. slipon and full systems for R6's..

http://www.tobefast.com/detail.aspx?ID=853

http://www.tobefast.com/detail.aspx?ID=854

 

Graves makes shorty cans.. slipon and full systems for R6's..

http://www.tobefast.com/detail.aspx?ID=853

http://www.tobefast.com/detail.aspx?ID=854

Is that MKINLA's track bike?? Always wondered that.

 

Yeah it is mklina's bike

I also thought about cutting my can down like 4 or 5 inches I like the look of the short can, but I can't bring myself to cut a $550 can.

 

yeah it's mkinla's... He bought the very first one we got... :fact

 

Well for all the skeptical people, including myself, that thought it was a hack job I found a site that sells Evo2's and the diagram for the R6 puts the sticker in that same exact place. And looking at the hanger, it looks like his is real. See for yourself!
http://store.58cycle.com/SearchResults.asp?Cat=327
:boobies

 

Cool...thanks for finding that scurf69.

 

I have the Evo2 system on my r6..